Kittie
This tutorial was written by me on March 25th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:
Scrap Kit of choice, I am using a PTU Scrapkit called *Kittie* By MellieBeans
You can purchase her kits from here.
Tube or Image of choice, I am using a PTU Tube *Kittie* By ©Spazzd Art can be found here.
Mask of choice
Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin
650X650New Image Canvas-Transparent Back Ground
Open your tube
Copy & Paste to center of your canvas.
Open e12
Copy &Paste to bottom layer. Resize & Position center of your canvas. Tube be on top and center in the e12. Then flip your tube by pressing ctrl+M.
Open e08
Copy & Paste to top layer. Resize & Position to bottom center of your tube as I have done. Duplicate and then flip the copy by pressing ctrl+M. Then select your tube and go over and get you eraser tool and erase the tube that runs under and you see in this element.
Open e14
Copy & Paste to layer just below tube layer. Resize & Position to fit behind your tube then rotate as I have done or to your liking.
Open e28
Copy & Paste to layer just above frame. Resize & Position to left side of your tube and place to fit your frame.
Open e36
Copy & Paste to top layer. Resize & Position to right side on top of e08 and resize to fit from right side to the middle of e08. Duplicate and we are going to mirror image the copy by pressing ctrl+B.
Open e05
Copy & Paste to layer just above your frame. Resize & Position to fit the center of your work.
Open e51
Copy & Paste to layer just below tube. Resize & Position to right side of your tube and center of your frame.
Open e37
Copy & Paste to layer just above clock. Resize & Position to fit under the clock and arrange as you wish.
Open e33
Copy & Paste to layer just below clock. Resize & Position to fit under the clock and e37 and arrange as you wish.
Open e32
Copy & Paste to top layer. Resize & Position add to top of frame just behind your elements under the clock. (Duplicate) to make darker if you wish.
Open e53
Copy & Paste to top layer. Resize & Position add to left side of your tube and add where you would like. (Duplicate) then flip by pressing ctrl+M and resize.
Open e55
Copy & Paste to top layer. Resize & Position add to right side of your work and add and arrange to your liking.
Open pp07
Copy & Paste to bottom layer. Resize & Position to fit bottom to fit frame.
Open pp06
Copy & Paste to bottom layer
Resize to fit frame layer. (Duplicate)
Then add mask of choice
Mask I used is called WSL_Mask302
Font used AHDN Size 20 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2 Horizontal: 2 Opacity: 45 Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial
This tutorial was written by me on March 25th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:
Scrap Kit of choice, I am using a PTU Scrapkit called *Kittie* By MellieBeans
You can purchase her kits from here.
Tube or Image of choice, I am using a PTU Tube *Kittie* By ©Spazzd Art can be found here.
Mask of choice
Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin
650X650New Image Canvas-Transparent Back Ground
Open your tube
Copy & Paste to center of your canvas.
Open e12
Copy &Paste to bottom layer. Resize & Position center of your canvas. Tube be on top and center in the e12. Then flip your tube by pressing ctrl+M.
Open e08
Copy & Paste to top layer. Resize & Position to bottom center of your tube as I have done. Duplicate and then flip the copy by pressing ctrl+M. Then select your tube and go over and get you eraser tool and erase the tube that runs under and you see in this element.
Open e14
Copy & Paste to layer just below tube layer. Resize & Position to fit behind your tube then rotate as I have done or to your liking.
Open e28
Copy & Paste to layer just above frame. Resize & Position to left side of your tube and place to fit your frame.
Open e36
Copy & Paste to top layer. Resize & Position to right side on top of e08 and resize to fit from right side to the middle of e08. Duplicate and we are going to mirror image the copy by pressing ctrl+B.
Open e05
Copy & Paste to layer just above your frame. Resize & Position to fit the center of your work.
Open e51
Copy & Paste to layer just below tube. Resize & Position to right side of your tube and center of your frame.
Open e37
Copy & Paste to layer just above clock. Resize & Position to fit under the clock and arrange as you wish.
Open e33
Copy & Paste to layer just below clock. Resize & Position to fit under the clock and e37 and arrange as you wish.
Open e32
Copy & Paste to top layer. Resize & Position add to top of frame just behind your elements under the clock. (Duplicate) to make darker if you wish.
Open e53
Copy & Paste to top layer. Resize & Position add to left side of your tube and add where you would like. (Duplicate) then flip by pressing ctrl+M and resize.
Open e55
Copy & Paste to top layer. Resize & Position add to right side of your work and add and arrange to your liking.
Open pp07
Copy & Paste to bottom layer. Resize & Position to fit bottom to fit frame.
Open pp06
Copy & Paste to bottom layer
Resize to fit frame layer. (Duplicate)
Then add mask of choice
Mask I used is called WSL_Mask302
Font used AHDN Size 20 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2 Horizontal: 2 Opacity: 45 Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial
Tube is sold separate.
No comments:
Post a Comment