Pages

Thursday, April 21, 2016

New CT Tutorial For PinkParadox Productions Using Kit ♥♥ Blazing Concert ♥♥

✿➹⁀✿ Blazing Concert ✿➹⁀✿

This tutorial was written by me on April 21st, 2016. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called ♥ Blazing Concert ♥ By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.


Tube or Image of choice, I am using a PTU Tube Called  ♥ Blaze ♥ By ©Nocturne
You can find this gorgeous tube here.

Mask of choice
I used the mask called  WSL_Mask302

Text of choice
My text is called Acryle Script PersonalUse Size 28 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open Frames (7)
Copy & Paste to top layer. Re size and Position to the center of your canvas.

Open Tube
Copy & Paste to top layer. Re size & Position add to center bottom of frames (7).

Open Element (61)
Copy & Paste to top layer. Re size & Position add to right side upper corner of frames (7).

Open Element (72)
Copy & Paste to layer just above frames (7). Re size & Position add to center top on your frames (7).

Open Element (73)
Copy & Paste to layer just below tube. Re size & Position add to right side bottom corner of frames (7).
 
Open Element (71)
Copy & Paste to layer just below tube. Re size & Position add to right side bottom corner of frames (7). Rotate like I have done or as you wish.

Open Element (65)
Copy & Paste to layer just below tube. Re size & Position addto  right side bottom on element (71). Add as you wish.

Open Element (89)
Copy & Paste to layer just below tube. Re size & Position add to left side center up behind tube as I have done.

Open Element (86)
Copy & Paste to layer just below element (73). Re size & Position add to right side bottom just next to elements (73). Add as you wish.

Open Element (22)
Copy & Paste to layer just below tube. Re size & Position add to right side center up on element (71) and rotate just a little.

Open Element (77)
Copy & Paste to layer just below tube. Re size & Position add to right side top corner of frames (7).

Open Element (94)
Copy & Paste to layer just below tube.  Re size & Position add to right side of tube. Add where you wish.

Open Element (112)
Copy & Paste to bottom layer. Re size & Position add to center bottom so tube looks as she is sitting on element.

Open Element (164)
Copy & Paste to bottom layer. Re size & Position add to center of your canvas.

Open Papers (7)
Copy & Paste to layer just below frames (7). Re size & Position add to fit inside of frame.

Open Close-Up of Tube
Copy & Paste to layer just below frames (7). Re size & Position add to fit inside of frame. Then work with your tube.

Open Papers (40)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 55  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.


Tuesday, April 19, 2016

New CT Tutorial For PinkParadox Productions Using Kit ♥♥ Secretly Passionate ♥♥


✿➹⁀✿ Secretly Passionate ✿➹⁀✿

This tutorial was written by me on April 19th, 2016. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called ♥ Secretly Passionate ♥ By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  ♥ Melody ♥ By ©Nocturne
You can find this gorgeous tube here.

Mask of choice
I used the mask called  WSL_Mask302 and

Text of choice
My text is called Acryle Script Personal Use Size 18 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open Tube
Copy & Paste to top layer. Re size & Position add to center of your canvas.

Open Element (133)
Copy & Paste to bottom layer. Re size & Position add to center behind tube layer as I have done.

Open Element (135)
Copy & Paste to layer just below tube. Re size & Position add to center and up behind tube as I have done. Add so as if your tube is on element.

Open Element (198)
Copy & Paste to bottom layer. Re size & Position add to right side upper corner. Duplicate with copy mirror image it to match on the left side.
 
Open Element (205)
Copy & Paste to layer just below element (135). Re size & Position add to center up behind your tube as I have done.

Open Element (74)
Copy & Paste to layer just below element (205). Re size & Position add right side up beside tube and rotate. Duplicate and with copy add down some from original then flip it.

Open Element (59)
Copy & Paste to layer just below tube. Re size & Position add to right side bottom center next to tube.

Open Element (58)
Copy & Paste to top layer. Re size & Position add to right side bottom just next to elements (59). Add as you wish.

Open Element (63)
Copy & Paste to layer just below element (59). Re size & Position add to right side center up next to element (59) and rotate to your liking.

Open Element (8)
Copy & Paste to layer just below tube. Re size & Position add to left side up next to tube. Flip your element if you would like it to look like mine.

Open Element (101)
Copy & Paste to layer just below tube.  Re size & Position add to left side of tube. Add where you wish and rotate to make it sit upright.

Open Element (30)
Copy & Paste to top layer. Re size & Position add to left side up next to tubes feet.

Open Element (29)
Copy & Paste to top layer. Re size & Position add to left side up next to either side of element (30). Duplicate with copy add to the other side of element (30).

Open Element (100)
Copy & Paste to layer just below element (74). Re size & Position add to either side toward the top. Duplicate and mirror image to match on other side.

Open Element (70)
Copy & Paste to top layer. Re size & Position add to left side bottom corner of work as I have done. Then flip the element as I have if you wish.

Open Papers (50)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 55  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.


Saturday, April 16, 2016

New CT Tutorial For PinkParadox Productions Using Kit ♥♥ Wedding Day ♥♥


 ✿➹⁀✿ Wedding Day ✿➹⁀✿

This tutorial was written by me on April 16th, 2016. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called ♥ Wedding Day ♥ By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  ♥ Bride ♥ By ©Verymany
You can find this gorgeous tube here.

Mask of choice
I used the mask called  WSL_Mask302 and WSL_Mask353

Text of choice
My text is called Calendary Hands PERSONAL USE DE Size 20 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open Tube
Copy & Paste to top layer. Re size & Position add to center add toward the bottom of your canvas.

Open Element (76)
Copy & Paste to bottom layer. Re size & Position add to bottom center under as if tube is on element.

Open Element (77)
Copy & Paste to bottom layer. Re size & Position add to center and up behind tube as I have done. Duplicate x3 times to make water darker.

Open Element (1)
Copy & Paste to layer just below tube. Re size & Position add to left side  up behind tube and on your water elements. Flip if you wish as I have done.

Open Element (74)
Copy & Paste to layer just below tube. Re size & Position add to center up behind your tube as I have done. Duplicate to make darker if you wish.

Open Element (107)
Copy & Paste to layer just below tube. Re size & Position add left side bottom corner up behind your tube. Add where you wish.

Open Element (108)
Copy & Paste to layer just below tube. Re size & Position add to left side bottom corner up in front of element (107) blend in. Duplicate and flip copy and move just to the right of your origial copy.

Open Element (110)
Copy & Paste to layer just below tube. Re size & Position add to right side bottom just next to elements (107 and 108).

Open Element (16)
Copy & Paste to layer just below tube. Re size & Position add to right side lower corner up next to tree element (110). Flip by pressing ctrl+B and add where you wish.

Open Element (79)
Copy & Paste to bottom layer. Re size & Position add to center top just off to the left some and duplicate to make clouds darker.

Open Element (78)
Copy & Paste to bottom layer.  Re size & Position add to top right side behind your clouds. Duplicate to make the sun brighter.

Open Element (88)
Copy & Paste to layer just below tube. Re size & Position add to right side bottom up behind tube to the right side of basket element.

Open Element (111)
Copy & Paste to layer just below tube. Re size & Position add to left side right behind tube as if the tree is behind tube.

Open Element (99)
Copy & Paste to layer just below tube. Re size & Position add to left side up next to tree and flip and blend in with tree. Duplicate with copy as to the other side of the same tree and flip and blend in again.

Open Element (58)
Copy & Paste to layer just below tube. Re size & Position add to center top up behind tube as I have done.

Open Element (57)
Copy & Paste to layer just above element (110). Re size & Position add to element (110) tree right above basket.

Open Element (122)
Copy & Paste to top layer. Re size & Position add to center left side as if in front of tree layer.

Open Element (14)
Copy & Paste to top layer. Re size & Position add to center bottom up next to tube. Add like mine or where you like.

Open Element (46)
Copy & Paste to top layer. Re size & Position add to center bottom just off to the right up next to tube. Add like mine or where you like.

Open Element (36)
Copy & Paste to top layer. Re size & Position add to center bottom up on element (46) as if they are sitting on it. Add like mine or where you like.

Open Element (17)
Copy & Paste to top layer. Re size & Position add to left bottom corner up next to tube. Add like mine or where you like.

Open Element (47)
Copy & Paste to top layer. Re size & Position add to center bottom up next to glasses. Add like mine or where you like.

Open Element (22)
Copy & Paste to top layer. Re size & Position add to center bottom up next to tube. Add like mine or where you like.

Open Element (23)
Copy & Paste to top layer. Re size & Position add to center bottom up on element (46). Add like mine or where you like.

Open Element (7)
Copy & Paste to top layer. Re size & Position add to left side up by rainbow and clouds. Add where you wish.

Open Element (35)
Copy & Paste to top layer. Re size & Position add to center up by rainbow and clouds. Duplicate and with your copy flip it. Add where you wish.

Open Papers (32 bottom and 29 top)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 55  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.



Thursday, April 14, 2016

New CT Tutorial For PinkParadox Productions Using Kit ♥♥ Naughty Princess ♥♥

✿➹⁀✿ Naughty Princess ✿➹⁀✿

This tutorial was written by me on April 14th, 2016. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called ♥ Naughty Princess ♥ By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  ♥ Princess ♥ By ©Verymany
You can find this gorgeous tube here.

Mask of choice
I used the mask called  WSL_Mask302

Text of choice
My text is called Amazing Bro Size 28 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open Frames (14)
Copy & Paste to top layer. Re size & Position add to center on your canvas.

Open Tube
Copy & Paste to top layer. Re size & Position add to center add to bottom of frames (14).

Open Element (97)
Copy & Paste to top layer. Re size & Position add to bottom center in front of tube. Use your erase tool to erase the bottom part of your tube that goes down under car element.

Open Element (70)
Copy & Paste to layer just below tube. Re size & Position add to left side bottom corner of tube.

Open Element (51)
Copy & Paste to layer just below tube. Re size & Position add to left side  bottom up next to tube layer, as I have done and blend in as you wish.

Open Element (39)
Copy & Paste to layer just above frames (14). Re size & Position add to left side bottom corner of tube layer. Add up behind coins element and rotate to blend in. Duplicate and with copy mirror image it to match other side.

Open Element (35)
Copy & Paste to top layer. Re size & Position add left side bottom corner. Add where you wish.

Open Element (16)
Copy & Paste to layer just below tube. Re size & Position add to right side bottom corner up behind tube. Add as you wish.

Open Element (17)
Copy & Paste to layer just below tube. Re size & Position add to right side bottom just next to element (16).

Open Element (20)
Copy & Paste to layer just below tube. Re size & Position add to right side lower corner up next to elements (16 and 17). Duplicate and add copy as I have or as you like.

Open Element (49)
Copy & Paste to layer just above element (116). Re size & Position add to right side bottom corner up in front of element (16). Add where you wish.

Open Element (52)
Copy & Paste to layer just above element (39). Re size & Position add to right side bottom corner up next to elements as I have done.

Open Element (82)
Copy & Paste to layer just above frames (14). Re size & Position add to right side bottom up behind element (39) and rotate if you wish.

Open Element (106)
Copy & Paste to bottom layer. Re size & Position add to center of your canvas.

Open Element (167)
Copy & Paste to top layer. Re size & Position add to left left side toward the bottom up next to tube as I have done.

Open Element (169)
Copy & Paste to top layer. Re size & Position add to left side toward the bottom up next to tube under element (167).

Open Element (177)
Copy & Paste to layer just below frames (14). Re size & Position add to top and duplicate as many times as you wish and add where you like.

Open Element (176)
Copy & Paste to layer just below elements (177). Re size & Position add to top and duplicate as many times as you wish and add where you like.

Open Element (179)
Copy & Paste to top layer. Re size & Position add to left side up by work elements. Duplicate and mirrow image the copy to match the other side.

Open Papers (12)
Copy & Paste to layer just below frame. Re size & Position to fit in frames (14)

Open Papers (49)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 55  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.


Wednesday, April 13, 2016

New CT Tutorial For PinkParadox Productions Using Kit **Gothic Lolita**

✿➹⁀✿ Gothic Lolita ✿➹⁀✿

This tutorial was written by me on April 13th, 2016. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called ♥ Gothic Lolita ♥ By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  ♥ Magda ♥ By ©Alex_Prihodko
You can find this gorgeous tube here.

Mask of choice
I used the mask called  WSL_Mask302

Text of choice
My text is called Avalanche Script TT Size 16 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open Frames (24)
Copy & Paste to top layer. Re size & Position add to center just off to right some of your work area. Add down in from of tubes leg as I have done or as you wish.

Open Tube
Copy & Paste to top layer. Re size & Position add to center add to bottom of frames (24).

Open Element (91)
Copy & Paste to layer just below tube. Re size & Position add to bottom left side corner of tube as I have done. Duplicate and rotate or flip and re size copy.

Open Element (156)
Copy & Paste to bottom layer. Re size & Position add to center bottom under your tube layer.

Open Element (89)
Copy & Paste to top layer. Re size & Position add to left side  bottom up next to tube layer, as I have done and blend in as you wish.

Open Element (158)
Copy & Paste to layer just above frames (24). Re size & Position add to right side bottom corner of tube layer. Add as you wish.

Open Element (131)
Copy & Paste to layer just above frames (24). Re size & Position add to center up behind tube.

Open Element (135)
Copy & Paste to layer just above element (131). Re size & Position add to right side bottom corner up behind tube. Add as you wish.

Open Element (7)
Copy & Paste to top layer. Re size & Position add to right side up on the back of couch layer. As if  cat is laying on top of couch.

Open Element (36)
Copy & Paste to layer just below tube. Re size & Position add to left side lower corner up next to hand of tube as I have done.

Open Element (64)
Copy & Paste to layer just above element (158). Re size & Position add to left side bottom corner up next to tube. Flip as I have done or just keep as is.

Open Element (60)
Copy & Paste to layer just above element (64). Re size & Position add to left side bottom corner up next to element (64) as I have done.

Open Element (204)
Copy & Paste to top layer. Re size & Position add to center left side of tube as I have done.

Open Element (211)
Copy & Paste to top layer. Re size & Position add to center top of your frames (24).

Open Element (227)
Copy & Paste to bottom layer. Re size & Position add to left or right side then duplicate and mirror image your copy to match other side.

Open Element (221)
Copy & Paste to layer just above frames (24). Re size & Position add to center top of frames (24) as I have done.

Open Element (228)
Copy & Paste to layer just below tube. Re size & Position add to center up behind your tube.

Open Element (71)
Copy & Paste to top layer. Re size & Position add to center bottom up next to your tube like I have done.

Open Element (187)
Copy & Paste to layer just above tube. Re size & Position add to left side up behind your word element.

Open Papers (12)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 55  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.


Monday, April 11, 2016

New CT Tutorial For PinkParadox Productions Using Kit **Sunny Daydream**

✿➹⁀✿ Sunny Daydream ✿➹⁀✿

This tutorial was written by me on April 11th, 2016. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called ♥ Sunny Daydream ♥ By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  *Furry Friend 2* By ©Verymany
You can find this gorgeous tube here.

Mask of choice
I used the mask called  WSL_Mask302

Text of choice
My text is called Magneto Size 20 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open Tube
Copy & Paste to top layer. Re size & Position add to center a little toward bottom.

Open Element (24)
Copy & Paste to top layer. Re size & Position add to center just off to right some of your work area. Add down in from of tubes leg as I have done or as you wish.

Open Element (23)
Copy & Paste to top layer. Re size & Position add to center just off to left of Element (24) right up against it as I have done.

Open Element (21)
Copy & Paste to top layer. Re size & Position add to center bottom up next to cup and rotate as I have if you wish too.

Open Element (31)
Copy & Paste to layer just above tube layer. Re size & Position add to center bottom up next to tube layer, as I have done and blend in as you wish.

Open Element (32)
Copy & Paste to bottom layer. Re size & Position add to right side bottom corner of tube layer. Add as you wish. Flip as I have if you like.

Open Element (35)
Copy & Paste to layer just below tube. Re size & Position add to right side bottom just in front of element (32). Blend in as you wish.

Open Element (41)
Copy & Paste to layer just below element (35). Re size & Position add to right side bottom corner up behind element (35). Add as you wish.

Open Element (49)
Copy & Paste to layer just below tube layer. Re size & Position add to left side lower corner up behind tubes foot. Add as you wish.

Open Element (54)
Copy & Paste to layer just below tube. Re size & Position add to right side lower corner up next to foot of tube as I have done. Flip as I have done if you wish.

Open Element (63)
Copy & Paste to bottom layer. Re size & Position add to center of canvas up behind tube as I have done.

Open Element (64)
Copy & Paste to layer just above element (63). Re size & Position add to left side bottom corner up next to tube layer as I have done.

Open Element (84)
Copy & Paste to bottom layer. Re size & Position add to center up behind your tube layer. Add as you wish.

Open Element (89)
Copy & Paste to layer just above element (84). Re size & Position add to center bottom as if tube is on it. Then duplicate as many times as you like and re size to fill in as you like.

Open Element (94)
Copy & Paste to layer just above your elements (89). Re size & Position add to center bottom and add to top of grass layers.

Open Element (129)
Copy & Paste to layer just below tube. Re size & Position add to center right behind tube layer and add as you wish.

Open Element (83)
Copy & Paste to layer just below tube. Re size & Position add to right side center up on fence layer as I have done.

Open Element (139)
Copy & Paste to layer just below element (63). Re size & Position add to right side center up on fence layer as I have done. Duplicate and mirror image to match on left side.

Open Element (11)
Copy & Paste to top layer. Re size & Position add to right side up by garden sign.

Open Element (6)
Copy & Paste to layer just below element (49). Re size & Position add to left side up by wagen.

Open Element (148)
Copy & Paste to top layer. Re size & Position add to top center as I have done.

Open Papers (12)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 55  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.


Monday, April 4, 2016

New CT Tutorial For PinkParadox Productions Using Kit **Alluring Spice**

✿➹⁀✿ Alluring Spice ✿➹⁀✿

This tutorial was written by me on April 4th, 2016. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called ♥Alluring Spice ♥ By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  *Teresa* By ©Verymany
You can find this gorgeous tube here.

Mask of choice
I used the mask called  WSL_Mask302

Text of choice
My text is called Derniere Script Size 24 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open Frames (19)
Copy & Paste to top layer. Re size & Position add to center just off to left some of your work area. Flip frame as I have done or leave it just as it is.

Open Element (173)
Copy & Paste to bottom layer. Re size & Position add to center of your canvas as I have done.

Open Element (7)
Copy & Paste to top layer. Re size & Position add to right side bottom corner of frame (19). Add as you wish.

Open Element (10)
Copy & Paste to top layer. Re size & Position add to right side as if on camels back. Add as you like.

Open Element (9)
Copy & Paste to top layer. Re size & Position add to left side bottom corner of frames (19). Add as you wish.

Open Element (49)
Copy & Paste to layer just above frame (19). Re size & Position add to left side up behind element (9).

Open Element (50)
Copy & Paste to layer just above frame (19). Re size & Position add to right side bottom corner of frame (19). Add as you wish.

Open Element (57)
Copy & Paste to layer just above frame (19).. Re size & Position add to left side lower corner on frame (19). Flip as I have done if you like. Add as you wish.

Open Element (72)
Copy & Paste to top layer. Re size & Position add to top of your frame (19). Rotate is you wish as I have done.

Open Element (92)
Copy & Paste to layer just above frame (19). Re size & Position add to top under element (72) as I have done.

Open Element (105)
Copy & Paste to layer just below frame (19). Re size & Position add to center bottom of frame (19). Add as you wish.

Open Element (162)
Copy & Paste to layer just below frame (19). Re size & Position add to left side center of frame (19) like I have done. Duplicate with copy mirror image and then move up some.

Open Element (165)
Copy & Paste to layer just above element (92). Re size & Position add to left side upper corner of your frame (19).

Open Element (14)
Copy & Paste to top layer. Re size & Position add to left side and add where you wish. Duplicate as many times as you like.

Open Your Tube
Copy & Paste to layer just above element (92). Re size & Position add to right side of your work as I have done. Add as you wish.

Open Papers (3)
Copy & Paste to layer just below frame (19). Re size & Position to fit inside frame.

Open Papers (38)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 55  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.