Glammed Up
This tutorial was written by me on March 24th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:
Scrap Kit of choice, I am using a PTU Scrapkit called *Glammed Up* By MellieBeans
You can purchase her kits from here and here.
Tube or Image of choice, I am using a PTU Tube *Christelle Rockabilly* By © Celinart Pinups can be found here.
Mask of choice
Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin
650X650New Image Canvas-Transparent BKgrnd
Open your tube
Copy & Paste to center more toward the bottom of your canvas.
Open e21
Copy &Paste to bottom layer. Resize & Position center of your canvas. Tube should fit your frame and be below your frame as I have mine.
Open e34
Copy & Paste to layer just below your tube. Resize & Position one of your corner on frame. Then made 3 copies and add to each corner.
Open e16
Copy & Paste to layer just above tube layer. Resize & Position to fit behind your cup. Then duplicate and flip it by pressing ctrl+M.
Open e47
Copy & Paste to layer just above frame. Resize & Position to center of frame and add to where you wish.
Open e48
Copy & Paste to layer just below your tube. Resize & Position to anywhere on your work and copy and resize as much as you like.
Open e03
Copy & Paste to top layer. Resize & Position to fit on one of your bigger e48. Then copy
more and arrange as I have or as you wish.
Open e40
Copy & Paste to layer just below tube. Resize & Position to fit down under your tube off to either side. Then duplicate 5 times. One will stay with your original and 2 will be moved to other side by pressing ctrl+B. Next move other copies as you wish and rotate and resize if you wish.
Open e02
Copy & Paste to layer just above frame. Resize & Position to as you wish and copy as many as you wish and resize them as you desire or flip by pressing ctrl+M.
Open e49
Copy & Paste to layer just above frame. Resize & Position to right side of your frame and resize until it fit you work. (Duplicate) and press ctrl+B to add to other side.
Open e20
Copy & Paste to top layer. Resize & Position add to top of frame and add where you wish. (Duplicate) move copy to a different area on your work. Then flip it by pressing ctrl+M.
Open pp07
Copy & Paste to bottom layer. Resize & Position to fit inside your frame layer.
Open pp03
Copy & Paste to bottom layer
Resize to fit frame layer. (Duplicate)
Then add mask of choice
Mask I used is called WSL_Mask84
Font used Bauhaus 93 Size 16 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2 Horizontal: 2 Opacity: 45 Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial
This tutorial was written by me on March 24th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:
Scrap Kit of choice, I am using a PTU Scrapkit called *Glammed Up* By MellieBeans
You can purchase her kits from here and here.
Tube or Image of choice, I am using a PTU Tube *Christelle Rockabilly* By © Celinart Pinups can be found here.
Mask of choice
Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin
650X650New Image Canvas-Transparent BKgrnd
Open your tube
Copy & Paste to center more toward the bottom of your canvas.
Open e21
Copy &Paste to bottom layer. Resize & Position center of your canvas. Tube should fit your frame and be below your frame as I have mine.
Open e34
Copy & Paste to layer just below your tube. Resize & Position one of your corner on frame. Then made 3 copies and add to each corner.
Open e16
Copy & Paste to layer just above tube layer. Resize & Position to fit behind your cup. Then duplicate and flip it by pressing ctrl+M.
Open e47
Copy & Paste to layer just above frame. Resize & Position to center of frame and add to where you wish.
Open e48
Copy & Paste to layer just below your tube. Resize & Position to anywhere on your work and copy and resize as much as you like.
Open e03
Copy & Paste to top layer. Resize & Position to fit on one of your bigger e48. Then copy
more and arrange as I have or as you wish.
Open e40
Copy & Paste to layer just below tube. Resize & Position to fit down under your tube off to either side. Then duplicate 5 times. One will stay with your original and 2 will be moved to other side by pressing ctrl+B. Next move other copies as you wish and rotate and resize if you wish.
Open e02
Copy & Paste to layer just above frame. Resize & Position to as you wish and copy as many as you wish and resize them as you desire or flip by pressing ctrl+M.
Open e49
Copy & Paste to layer just above frame. Resize & Position to right side of your frame and resize until it fit you work. (Duplicate) and press ctrl+B to add to other side.
Open e20
Copy & Paste to top layer. Resize & Position add to top of frame and add where you wish. (Duplicate) move copy to a different area on your work. Then flip it by pressing ctrl+M.
Open pp07
Copy & Paste to bottom layer. Resize & Position to fit inside your frame layer.
Open pp03
Copy & Paste to bottom layer
Resize to fit frame layer. (Duplicate)
Then add mask of choice
Mask I used is called WSL_Mask84
Font used Bauhaus 93 Size 16 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2 Horizontal: 2 Opacity: 45 Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial
No comments:
Post a Comment