New CT Tutorial For Ginnibug Designz Using Kit **Charming Easter**

Charming Easter

This tutorial was written by me  on March 28th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Charming Easter* By Ginnibug Designz

You can purchase her kits from any of these stores:

PFD: http://picsfordesign.com/en/catalogue/type/k/sort/date/auth/LapisGin.pix

Spazzd Art: http://spazzdart.com/store/index.php?main_page=index&cPath=5_27

S&Co: http://scrapsncompany.com/index.php?main_page=index&manufacturers_id=36

Tube or Image of choice, I am using a PTU Tube *Elis* By ©Lightartist_XXX can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center toward bottom of canvas.

Open ce14
Copy &Paste to bottom layer. Resize & Position add to center up behind your tube as I have done.

Open ce42
Copy & Paste to top layer.  Resize & Position add to top part of your fence layer.

Open ce86
Copy & Paste to layer just below tube. Resize & Position add to fit up against the bottom of fence layer.

Open ce116
Copy & Paste to layer just below tube. Resize & Position add to center just in front of eggs and blend in between tube and eggs.

Open ce2
Copy & Paste to top layer. Resize & Position add to right side and place on your tubes arm.

Open ce10
Copy & Paste to layer just above bottom fence layer. Resize & Position add to center bottom of fence and blend in behind your other eggs.

Open ce1
Copy & Paste to layer just above bottom layer. Resize & Position add to either side of fence layer and place on the grass as I have done.

Open ce106
Copy & Paste to layer just above bottom layer. Resize & Position add to right side and blend in with the grass of your bottom layer. (Duplicate) then flip your copy by pressing ctrl+M.

Open ce103
Copy & Paste to layer just above ce106. Resize & Position add to right side and blend in with ce106. (Duplicate) move your copy to the left side of your work area and put up behind your big egg.

Open ce36
Copy & Paste to layer just above bottom layer. Resize & Position add to left side of your work and place just behind your ce103 and big egg as I have done.

Open ce102
Copy & Paste to layer just below tube. Resize & Position add to right side and place in front of your flower layers.

Open ce118
Copy& Paste to layer jut above bottom layer. Resize & Position add to center and place toward the bottom of your fence and blend in behind your other elements. (Duplicate) then press ctrl+B and add to match you can arrange if you wish too.

Open ce82
Copy & Paste to bottom layer. Resize & Position add to top center so it looks like it is behind the fence.

Open cep17
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Wizard Of The Moon Size 18 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Scrap und Grafik Design Using Kit **Easter Party**

Easter Party

This tutorial was written by me  on March 27th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Easter Party* By Scrap und Grafik Design

You can purchase her kits from any of these stores:
Scrap und Grafik:
http://dagnys-scrap.cwsurf.de/Shop1/categories.php?CategoryID=1003

Insprirations of Sprapfriends:
http://inspirationsofscrapsfriends.com/shop/index.php?main_page=index&manufacturers_id=169

Tube or Image of choice, I am using a PTU Tube *Easter Girl 3* By ©Alex_Prihodko can be found here.


Mask of choice

Program Used: Paint Shop Pro X6 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center of canvas.

Open Frame 04
Copy &Paste to bottom layer. Resize & Position add to the bottom and place in the middle. Then we are going to flip the frame by pressing ctrl+M. Move your tube to look as if she is sitting in the frame bottom.

Open Easter Party 15
Copy & Paste to layer just above frame. Resize & Position add to the right bottom corner of your frame.

Open Easter Party 25
Copy & Paste to layer just below tube. Resize & Position add to the right bottom of your frame and place it on the top part of your basket and make it look as if it is sitting on the eggs.

Open Easter Party 29
Copy & Paste to layer just above frame. Resize & Position add to bottom center so it looks like grass under your work. Then flip by pressing ctrl+M.

Open Easter Party 35
Copy & Paste to layer just above frame. Resize & Position add to top right corner of your frame.

Open Easter Party 38
Copy & Paste to layer just above frame. Resize & Poissition add to the top right corner of your frame and arrange behind your last flower element. Then duplicate and flip by pressing ctrl+M and move to other side of flower to match.

Open Easter Party 36
Copy & Paste to layer just below your grass. Resize & Position add to upper right corner of your frame and place in front middle of your flowers.

Open Easter Party 41
Copy & Paste to layer just below your lamb. Resize & Position add to just above your lamb.

Open Easter Party 40
Copy & Paste to layer just under your tube. Resize & Position to bottom right and make sure that you resize it so you can fit 2 more across your bottom. (Duplicate) then press ctrl+B to add to other side. Then duplicate and add to front center.

Open Easter Party 12
Copy & Paste to layer just above frame. Resize & Position add to left side right behind your tube. (Duplicate) then add to other side by pressing ctrl+B.

Open Easter Party 51
Copy& Paste to top layer. Resize & Position to bottom and place so it look as if your chick is standing on one of the egg shells. Then you can flip as I have done by pressing ctrl+M.

Open Easter Party 68
Copy& Paste to layer just below your Happy Easter element. Resize & Position add to right side behind your basket. Flip by pressing ctrl+M.

Open Easter Party 67
Copy& Paste to layer just below your tube. Resize & Position add right behind your tube layer. Then duplicate and press ctrl+B to add to the other side. With the copy you will need to move down a few layers.

Open Easter Party Papers 01
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_ Mask302

Font used BankGothic Md BT  Size 16 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial for Spazzd Art/MellieBeans Tube used *Red* By Spazz Kit used *Red* By MellieBeans

Red

This tutorial was written by me  on March 27th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Red* By MellieBeans

You can purchase her kits from here.

Tube or Image of choice, I am using a PTU Tube *Red* By ©Spazzd Art can be found here.


Plugins: KPT Collection

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to center of your canvas. Resize to what you like.

Open e31
Copy &Paste to bottom layer. Resize & Position add  toward the bottom and center of your tube. Rotate your frame if you wish as I have done.

Open e11
Copy & Paste to layer just below your tube.  Resize & Position add to bottom left corner of your frame. (Duplicate) and add to other side of your work by pressing ctrl+B. Next we will need to flip both copies by pressing ctrl+M.

Open e13
Copy & Paste to layer just below your tube. Resize & Position add to right side and center to fit inside frame.

Open e30
Copy & Paste to layer just above e13. Resize & Position add to right side bottom corner of frame.

Open e26
Copy & Paste to top layer. Resize & Position add to right side bottom and place in front of your clock and arrange to your taste.

Open e47
Copy & Paste to top layer. Resize & Position to fit the center bottom of your work.

Open e48
Copy & Paste to top layer. Resize & Position add to the center of the candles we just added and place where you wish.

Open e40
Copy & Paste to layer just above frame. Resize & Position add to left bottom corner of frame and place as your wish or as I did.

Open e25
Copy & Paste to layer just above frame. Resize & Position add to upper left side corner of frame and arrange as you wish. (Duplicate) then we are going to press ctrl+B to add to other side.

Open e20
Copy & Paste to top layer. Resize & Position add to top of your work and place where you wish. (Duplicate) if you like and add and resize it is all up to you.

Open e09
Copy & Paste to layer just above e40. Resize & Position add behind your tube and so that it is over the book layer.

Open e17
Copy & Paste to top layer. Resize & Position add to left side bottom corner to blend in with you book.

Open pp03
Copy & Paste to bottom layer. Resize & Position to fit bottom to fit frame. Then go up to Effects and pull down to plugins. In Plugins go to KPT Collection then select KPT Ink Dropper. Once you are in KPT Ink Dropper you will use white and click in your box to add the white to the back ground. Have fun.

Open e50
Copy & Paste to your paper behind frame. Resize & Position add where you wish. Then duplicate it and add to other side by pressing ctrl+B. Then if you want them darker as I have done you will just have to select each and duplicate them.

Open pp06
Copy & Paste to bottom layer
Resize to fit your whole canvas. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Calendary Hands PERSONAL USE DE Size 16 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

Kit and Tube sold separately.

New CT PTU Tutorial For Eledweiss Design Using Kit **Easter of Fairyland**

Easter Of Fairyland

This tutorial was written by me on March 26th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag ** Scrap Kit of choice, I am using a PTU Scrapkit called *Easter Of Fairyland* By Edelweiss Design

You can find these beautiful kits in each of these stores:
They are available here:
http://inspirationsofscrapsfriends.com/shop/index.php?main_page=index&manufacturers_id=176&zenid=91fe46be38ba4c74d2adf62824cdf9c6
Also here:
http://renderartworld.com/shop/index.php?main_page=index&manufacturers_id=57&zenid=86d9407f697fc9e1bfd34cad88257a94
here:
http://inzpiredcreationz.com/store/index.php?main_page=index&cPath=3_132
And here on my blog:
http://edelweissdesign.revolublog.com/easter-to-fairyland-a115151666

Tube or Image of choice, I am using a PTU Tube *Esther* By ©Misticheskaya
You can find this amazing tube here. 

Mask of choice
My mask choice is called WSL_Mask302

Text Used AR BLANCA Size 16 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open you tube
Copy & Paste . Resize & Position add to center of your canvas.

Open ED_Easter_of_Fairyland_Frame_04
Copy & Paste to bottom layer. Resize & Position add to the center more toward the top of your work area.

Open ED_Easter_of_Fairyland_22
Copy& Paste to layer just below tube. Resize & Position add to bottom center of work area. It should look as if the grass is right under your tube.

Open ED_Easter_of_Fairyland_30
Copy & Paste to layer just under your tube. Resize & Position add to center right behind tube so it will blend in with your frame and grass.

Open ED_Easter_of_Fairyland_62
Copy & Paste to layer just behind your tube.. Resize & Position add to right side of your tube and place toward the center so it will blend in with the other elements.

Open ED_Easter_of_Fairyland_86
Copy & Paste to top layer.  Resize & Position add to the left side of your work area and tube. Adjust and try to blend in with your other elements.

Open ED_Easter_of_Fairyland_91
Copy & Paste to very bottom layer. Resize & Position add the the center of your work.

Open ED_Easter_of_Fairyland_116
Copy & Paste to layer just above frame. Resize & Position add to the center of your work right behind tube.

Open ED_Easter_of_Fairyland_128
Copy & Paste to layer two below your tube. Resize & Position add to the back center of your tube.

Open ED_Easter_of_Fairyland_129
Copy & Paste to layer just below Easter_of_Fairyland_128. Resize & Position add to left center of your work and blend in with the other elements.

Open ED_Easter_of_Fairyland_151
Copy & Paste to top layer. Resize & Position add to front bottom on your grass.

Open ED_Easter_of_Fairyland_188
Copy & Paste to top layer. Resize & Position add to left side and blend it in right up to your eggshell element. Flip your little chicks by pressing ctrl+M.

Open ED_Easter_of_Fairyland_184
Copy & Paste to top layer. Resize & Position add to right side of your work and place in front of your bucket element.

Open ED_Easter_of_Fairyland_14
Copy & Paste to layer just above your brick wall. Resize & Position add to right side of your work and place behind so it looks hidden and it blends in with your grass and flowers.

Open ED_Easter_of_Fairyland_Wordart5
Copy & Paste to layer just above your frame. Resize & Position add to top of your frame and center it just behind your tube.

Open ED_Easter_of_Fairyland_Papers_09
Copy & Paste to layer just below frame. Resize & Position add paper to your taste. Then select frame layer. Go over and select your wand tool. With your wand click the inside of your frame. You should see matching ants. Next go up to Selections-down to modify-over to extend- set to 13. Then select your paper layer again and go over and get your pointer tool and click inside the frame. Next you will need to go over and delete your first paper layer.

Open ED_Steampunk_For_Ever_Papers_06
Copy & Paste to bottom layer
Resize to fit canvas (Duplicate)

Then add mask of choice
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For PinkParadox Productions Using Kit **Photos Of Spring**

Photos Of Spring

This tutorial was written by me on March 25th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called *Photos Of Spring* By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.


Tube or Image of choice, I am using a PTU Tube Called  *Photographer* By ©VeryMany
you can find this gorgeous tube here.

Mask of choice
I used the mask called WSL_Mask302

Text of choice
My text is called Admiration Pains  Font Size 16 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to canvas. Resize and Position to center of your work.

Open Photos Of Spring (59)
Copy & Paste to bottom layer. Resize & Position add to the left side behind your tube.

Open Photos Of Spring (58)
Copy& Paste to bottom layer. Resize & Position to the left side behind you last element added and rotate if you desire.

Open Photos Of Spring (68)
Copy & Paste to bottom layer. Resize & Position add to the left side toward the bottom of your last two elements.

Open Photos Of Spring (63)
Copy & Paste to layer just below tube. Resize & Position add to the bottom part of your work and center it behind your tube.

Open Photos Of Spring (41)
Copy & Paste to top layer. Resize & Position add to the bottom part of your work and your tube. Place it where you would like. Flip by pressing ctrl+M.

Open Photos Of Spring (27)
Copy & Paste to layer just above your tube. Resize & Position add to fit behind your last action and place off to the right side.

Open Photos Of Spring (3)
Copy & Paste to layer just below tube. Resize & Position add to the right side just behind the tube. Then flip by pressing ctrl+M.

Open Photos Of Spring Paper (4)
Copy & Paste to layer below Photos Of Spring (63). Resize & Position add to fit behind and then select your eraser tool and erase paper that is outside of your film strip layer.

Open Photos Of Spring (72)
Copy & Paste to bottom layer. Resize & Position add to the right side toward the upper part behind your tube. Then flip the element by pressing ctrl+M.

Open Photos Of Spring (114)
Copy & Paste to layer behind Photos Of Spring (68). Resize & Position add behind your Photos Of Spring (68) and blend in.

Open Photos Of Spring (86)
Copy & Paste to bottom layer. Resize & Position add to the bottom of your work and arrange where you like it. (Duplicate)

Open Photos Of Spring (129)
Copy & Paste to layer just above Photos Of Spring (72). Resize & Position add to the right upper side of your work and flip by pressing ctrl+M. Arrange and place as you wish.

Open Photos Of Spring (128)
Copy& Paste to layer just below Photos Of Spring (114). Resize & Position add to the upper center of your work and blend in with your other elements.

Open Photos Of Spring (151)
Copy & Paste to bottom layer. Resize & Position add to upper right side and make it blend in the back of your elements.

Open Photos Of Spring (155)
Copy & Paste to layer just above Photos Of Spring (151). Resize & Position add to upper right side and make it blend in the back of your elements.

Open Photos Of Spring (52)
Copy & Paste to layer just above Photos Of Spring (72). Resize & Position add to upper center and blend in with your flower elements and rotate.

Open Photos Of Spring (55)
Copy & Paste to layer just behind top layer. Resize & Position add to blend in with your bottles and cup elements.

Open Photos Of Spring (158)
Copy & Paste to top layer. Resize & Position add to right upper corner.

Open Photos Of Spring Papers (1)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.

*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial for Spazzd Art/MellieBeans Tube used *Kittie* By Spazz Kit used *Kittie* By MellieBeans

Kittie

This tutorial was written by me  on March 25th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Kittie* By MellieBeans

You can purchase her kits from here.


Tube or Image of choice, I am using a PTU Tube *Kittie* By ©Spazzd Art can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650New Image Canvas-Transparent Back Ground

Open your tube
Copy & Paste to center of your canvas.

Open e12
Copy &Paste to bottom layer. Resize & Position center of your canvas. Tube be on top and center in the e12. Then flip your tube by pressing ctrl+M.

Open e08
Copy & Paste to top layer.  Resize & Position to bottom center of your tube as I have done. Duplicate and then flip the copy by pressing ctrl+M. Then select your tube and go over and get you eraser tool and erase the tube that runs under and you see in this element.

Open e14
Copy & Paste to layer just below tube layer. Resize & Position to fit behind your tube then rotate as I have done or to your liking.

Open e28
Copy & Paste to layer just above frame. Resize & Position to left side of your tube and place to fit your frame.

Open e36
Copy & Paste to top layer. Resize & Position to right side on top of e08 and resize to fit from right side to the middle of e08. Duplicate and we are going to mirror image the copy by pressing ctrl+B.

Open e05
Copy & Paste to layer just above your frame. Resize & Position to fit the center of your work.

Open e51
Copy & Paste to layer just below tube. Resize & Position  to right side of your tube and center of your frame.

Open e37
Copy & Paste to layer just above clock. Resize & Position to fit under the clock and arrange as you wish.

Open e33
Copy & Paste to layer just below clock. Resize & Position to fit under the clock and e37 and arrange as you wish.

Open e32
Copy & Paste to top layer. Resize & Position add to top of frame just behind your elements under the clock. (Duplicate) to make darker if you wish.

Open e53
Copy & Paste to top layer. Resize & Position add to left side of your tube and add where you would like. (Duplicate) then flip by pressing ctrl+M and resize.

Open e55
Copy & Paste to top layer. Resize & Position add to right side of your work and add and arrange to your liking.

Open pp07
Copy & Paste to bottom layer. Resize & Position to fit bottom to fit frame.

Open pp06
Copy & Paste to bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used AHDN Size 20 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial

Tube is sold separate.

New CT Tutorial For Mellie Bean Using Kit **Glammed Up**

Glammed Up

This tutorial was written by me  on March 24th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Glammed Up* By MellieBeans

You can purchase her kits from here and here.


Tube or Image of choice, I am using a PTU Tube *Christelle Rockabilly* By © Celinart Pinups can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to center more toward the bottom of your canvas.

Open e21
Copy &Paste to bottom layer. Resize & Position center of your canvas. Tube should fit your frame and be below your frame as I have mine.

Open e34
Copy & Paste to layer just below your tube.  Resize & Position one of your corner on frame. Then made 3 copies and add to each corner.

Open e16
Copy & Paste to layer just above tube layer. Resize & Position to fit behind your cup. Then duplicate and flip it by pressing ctrl+M.

Open e47
Copy & Paste to layer just above frame. Resize & Position to center of frame and add to where you wish.

Open e48
Copy & Paste to layer just below your tube. Resize & Position to anywhere on your work and copy and resize as much as you like.

Open e03
Copy & Paste to top layer. Resize & Position to fit on one of your bigger e48. Then copy
 more and arrange as I have or as you wish.

Open e40
Copy & Paste to layer just below tube. Resize & Position  to fit down under your tube off to either side. Then duplicate 5 times. One will stay with your original and 2 will be moved to other side by pressing ctrl+B. Next move other copies as you wish and rotate and resize if you wish.

Open e02
Copy & Paste to layer just above frame. Resize & Position to as you wish and copy as many as you wish and resize them as you desire or flip by pressing ctrl+M.

Open e49
Copy & Paste to layer just above frame. Resize & Position to right side of your frame and resize until it fit you work. (Duplicate) and press ctrl+B to add to other side.

Open e20
Copy & Paste to top layer. Resize & Position add to top of frame and add where you wish. (Duplicate) move copy to a different area on your work. Then flip it by pressing ctrl+M.

Open pp07
Copy & Paste to bottom layer. Resize & Position to fit inside your frame layer.

Open pp03
Copy & Paste to bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask84

Font used Bauhaus 93  Size 16 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial