New CT Tutorial For Ginnibug Designz Using Kit **Godilocks**

*Godilocks*

This tutorial was written by me  on July 22nd, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU Scrapkit called *Godilocks* By Ginnibug Designz

You can purchase this kit from here:
Hanias Design: http://haniadesign.com/store/index.php?main_page=product_info&cPath=50_164&products_id=4953

Tube or Image of choice, I am using a PTU Tube *Girl and a Pony* By ©Laguna can be found here.
http://picsfordesign.com/catalogue/id_120095_girl_and_a_pony.pix

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to top layer.  Resize & Position to left side toward bottom on canvas.

Open gle31
Copy &Paste to bottom layer. Resize & Position add to center right behind tube layer as I have done.

Open gle32
Copy & Paste to layer just below tube.  Resize & Position add to left side just behind tube.

Open gle51
Copy & Paste to layer just above gle31. Resize & Position add to right side up on gle31 as I have done.

Open gle5
Copy & Paste to layer just above gle51. Resize & Position add to right side bottom corner of gle51.

Open gle17
Copy & Paste to layer just below tube. Resize & Position add to right side bottom right behind tubes boots.

Open gle66
Copy & Paste to layer just below tube. Resize & Position add to right side bottom add as if in middle of other 2 bears.

Open gle96
Copy & Paste to layer just above gle32. Resize & Position add to center of gle32 as I have done.

Open gle77
Copy & Paste to layer just below tube. Resize & Position add to left side up behind tube.

Open gle21
Copy & Paste to bottom layer. Resize & Position add to right side up behind gle31 and gle32. Rotate. (Duplicate) mirror image copy by pressing ctrl+B.

Open gle23
Copy & Paste to layer just below gle96. Resize & Position add to center of gle32 just under gle96.

Open gle79
Copy & Paste to layer just above gle21. Resize & Position add to right side up in corner. Rotate

Open Smp17
Copy & Paste on bottom layer
Resize to canvas.

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Fairy Strange Size 14 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 65  Blur: 13.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Soon Mom**

*Soon Mom*

This tutorial was written by me  on July 9th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU Scrapkit called *Soon Mom* By Ginnibug Designz

You can purchase this kit from here:
Tiny Turtle Designs: http://tinyturtledesigns.com/store/index.php?main_page=product_info&cPath=8_316_317&products_id=5637

Tube or Image of choice, I am using a PTU Matching Tube *Soon Mom* By ©Lysisange can be found here.

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center of canvas.

Open Sme9
Copy &Paste to top layer. Resize & Position add to center bottom on tube. Select Erase Tool. Erase bottom part of tube that is below this element.

Open Sme10
Copy & Paste to top layer.  Resize & Position add to center bottom add in front of Sme9 and blend in.

Open Sme37
Copy & Paste to bottom layer. Resize & Position add to left side bottom next to tube. Rotate just a little.

Open Sme38
Copy & Paste to bottom layer. Resize & Position add to center behind tube.

Open Sme39
Copy & Paste to layer just above Sme38. Resize & Position add to right side bottom up next to tube as I have done.

Open Sme40
Copy & Paste to top layer. Resize & Position add to right side up against Sme39.

Open Sme52
Copy & Paste to layer just above Sme38. Resize & Position add to right side middle. Rotate. (Duplicate) then mirror image by pressing ctrl+B.

Open Sme73
Copy & Paste to top layer. Resize & Position add to left side bottom corner up next to gift as I have done.

Open Sme80
Copy & Paste to layer just above Sme38. Resize & Position add to center below tube. (Duplicate).

Open Sme87
Copy & Paste to layer just above Sme38. Resize & Position add to center top part of Sme38. Flip by pressing ctrl+M.

Open Sme84
Copy & Paste to bottom layer. Resize & Position add to left side up behind Sme38 as I have done. Flip ctrl+M. (Duplicate) then mirror image ctrl+B.

Open Sme86
Copy & Paste to top layer. Resize & Position add to center bottom.

Open Sme91
Copy & Paste to top layer. Resize & Position add to right side up on Sme87 as I have done.

Open Sme97
Copy & Paste to top layer. Resize & Position add to left side bottom corner. Flip ctrl+M.

Open Sme113
Copy & Paste to layer just above Sme38. Resize & Position add to right side up next to tube. (Duplicate) mirror image ctrl+B.

Open Sme108
Copy & Paste to layer just above Sme9. Resize & Position add to center bottom between Sme9 and Sme10.

Open Smp17
Copy & Paste on bottom layer
Resize to canvas.

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Runaway Lies Size 18 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 65  Blur: 13.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Mandy**

*Mandy*
This tutorial was written by me  on July 5th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU Scrapkit called *Mandy* By Ginnibug Designz

You can purchase this kit from here:
Spazzd Art: http://spazzdart.com/store/index.php?main_page=product_info&cPath=5_27&products_id=1462

Tube or Image of choice, I am using a FTU Tube *Holiday* By ©Lysisange can be found here.
PFD: http://picsfordesign.com/catalogue/id_119785_holiday.pix

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center of canvas.

Open me 7
Copy &Paste to bottom layer. Resize & Position add to center right behind tube.

Open me 8
Copy & Paste to layer just below tube.  Resize & Position add to left side of tubes leg. Flip by pressing ctrl+M.

Open me 6
Copy & Paste to layer just below tube. Resize & Position add to right side of tubes leg.

Open me 3
Copy & Paste to top layer. Resize & Position add to center bottom up against tubes legs.

Open me 4
Copy & Paste to bottom layer. Resize & Position add to center bottom just below tube as I have done.

Open me 12
Copy & Paste to layer just above me 7. Resize & Position add to right side up above clown and rotate.

Open me 14
Copy & Paste to top layer. Resize & Position add to center bottom just right of shoes. Flip ctrl+M.

Open me 23
Copy & Paste to layer just above tube. Resize & Position add to left side bottom and up against tube as I have done. Flip ctrl+M.

Open me 29
Copy & Paste to top layer. Resize & Position add to left side upper corner on me 7.

Open me 57
Copy & Paste to layer just below me 7. Resize & Position add to left side upper corner. (Duplicate) mirror image by pressing ctrl+B.

Open me 97
Copy & Paste to layer just below doll. Resize & Position add to right side bottom next to doll as I have done.

Open me 100
Copy & Paste to bottom layer. Resize & Position add to right side bottom blend in. (Duplicate) mirror image by pressing ctrl+B.

Open mp 13
Copy & Paste to layer just below me 7. Resize & Position add to center of me 7 and resize to fit the frame.

Open mp 7
Copy & Paste on bottom layer
Resize to canvas.

Then add mask of choice
Mask I used is called RR_MaskSet_2_1

Font used Britannic Bold Size 14 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 65  Blur: 13.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Arrgggh!**

ARRGGGH!
This tutorial was written by me  on June 17th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *ARRGGGH!* By Ginnibug Designz

You can purchase her kits from any of these stores:

ADI: http://store.artisticdreamsimaging.net/en/ginnibug-designz/7021-ginni-arrgggh-deka-kit-only-.html

Tube or Image of choice, I am using a PTU Tube *Pirate Life* By ©Arthur Crowe can be found here:
http://arthurcrowesfactory.com/store/index.php?route=product/product&filter_name=pirate&product_id=1512

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center of canvas.

Open Ae (13)
Copy &Paste to bottom layer. Resize & Position add to right side of tube.

Open Ae (12)
Copy & Paste to layer just below tube.  Resize & Position add to left side of tube.

Open Ae (6)
Copy & Paste to layer just below tube. Resize & Position add to right side then flip ctrl+M.

Open Ae (27)
Copy & Paste to layer just below (6). Resize & Position add to left side as if on Ae (12).

Open Ae (36)
Copy & Paste to top layer. Resize & Position add to right side just infront of Ae (6).

Open Ae (17)
Copy & Paste to top layer. Resize & Position add to left side bottom corner of Ae (12).

Open Ae (34)
Copy & Paste to layer just below tube . Resize & Position add to right side just infront of Ae (36).

Open Ae (39)
Copy & Paste to bottom layer. Resize & Position add to left side behind all and blend in.

Open Ae (46)
Copy & Paste to layer just above Ae (39). Resize & Position add to left side behind in on Ae (39).

Open Ae (43)
Copy & Paste to layer just below Ae (6). Resize & Position add to right side behind Ae (6) as I have done.

Open Ae (37)
Copy & Paste to layer just below Ae (36). Resize & Position add to right side behind Ae (36)Flip by pressing ctrl+M.

Open Ae (68)
Copy & Paste to bottom layer. Resize & Position add to center bottom (Duplicate) Copy Layer flip ctrl+M.

Open Ae (24)
Copy & Paste to layer just above  Ae (12). Resize & Position add to left side bottom.

Open Ae (70)
Copy & Paste to top layer. Resize & Position add to right side bottom corner.


Open Ap (2)
Copy & Paste on bottom layer
Resize to canvas.

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Runaway Lies Size 12 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 65  Blur: 13.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Grizzly Bear**

Grizzly Bear

This tutorial was written by me  on June 8th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Grizzly Bear* By Ginnibug Designz

You can purchase her kits from here.

S&Co: http://scrapsncompany.com/index.php?main_page=index&manufacturers_id=36

Tube or Image of choice, I am using a PTU Tube *Sexy Army* By ©The Hunter can be found here:
http://scrapsncompany.com/index.php?main_page=product_info&cPath=113_134_163&products_id=3659

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center of canvas.

Open Gbe 54
Copy &Paste to bottom layer. Resize & Position add to center behind tube.

Open Gbe 60
Copy & Paste to top layer.  Resize & Position add to bottom left corner on Gbe 54.

Open Gbe 59
Copy & Paste to top layer. Resize & Position add to bottom right corner on Gbe 54.

Open Gbe 65
Copy & Paste to bottom layer. Resize & Position add to bottom of your work and add to left half duplicate and mirror image by pressing ctrl+B.

Open Gbe 79
Copy & Paste to layer just above tube. Resize & Position add to right side of your work.

Open Gbe 12
Copy & Paste to layer just above Gbe 79. Resize & Position add to bottom right side corner and blend in as I have done.

Open Gbe 31
Copy & Paste to layer just above . Resize & Poissition add to bottom right side and add up against Gbe 12.

Open Gbe 10
Copy & Paste to top layer. Resize & Position add to bottom center of your work.

Open Gbe 3
Copy & Paste to layer just below Gbe 10. Resize & Position add to left side of Gbe 10 then flip by pressing ctrl+M.

Open Gbe 17
Copy & Paste to layer just below Gbe 3. Resize & Position add to left of Gbe 3.

Open Gbe 9
Copy & Paste to layer just below Gbe 17. Resize & Position add to right side behind cups. Flip by pressing ctrl+M.

Open Gbe 62
Copy & Paste to layer just above Gbe 54. Resize & Position add to left side on frame.

Open Gbe 63
Copy & Paste to layer just above  Gbe 62. Resize & Position add to left side just in front of Gbe 62. Resize and add as I have done.

Open Gbe 47
Copy & Paste to layer just below Gbe 60. Resize & Position add to left side up against jeep.

Open Gbe 51
Copy & Paste to layer just above Gbe 54. Resize & Position add to right upper corner of your frame.

Open Gbp 7
Copy & Paste to layer just below Gbe 54. Resize & Position to fit inside frame.

Open Gbp 10
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Bustamalaka  Size 16 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Fire Flight**

Fire Flight

This tutorial was written by me  on May 13th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Fire Flight* By Ginnibug Designz

You can purchase her kit from here.


Tube or Image of choice, I am using a PTU Tube *Color Ballerina* By ©Arthur Crowe
Tube can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to top layer.  Resize & Position add to center of canvas.

Open ff2
Copy &Paste to bottom layer. Resize & Position add to right side and rotate.

Open ff5
Copy & Paste to layer just above ff2.  Resize & Position add to center bottom. Flip by pressing ctrl+M.

Open ff23
Copy & Paste to layer just below ff5. Resize & Position add to left side.

Open ff38
Copy & Paste to top layer. Resize & Position add to left side of your work. Flip by pressing ctrl+M.

Open ff17
Copy & Paste to top layer. Resize & Position add to top of ff2.

Open ff12
Copy & Paste to top layer. Resize & Position add to right bottom corner of ff2.

Open ff22
Copy & Paste to layer just above ff2. Resize & Position add to left side behind ff23. Rotate

Open ff67
Copy & Paste to layer just above ff2. Resize & Position add to right side on ff2 as I have done.(Duplicate) mirror image by pressing ctrl+B.then move copy to match on ff2.

Open ff78
Copy & Paste to layer just above ff67. Resize & Position add to right bottom corner of ff2. (Duplicate) mirror image by pressing ctrl+B.

Open ff24
Copy & Paste to top layer. Resize & Position add to left side of work.

Open ffp4
Copy & Paste to bottom layer. Resize & Position add to fit in ff2.

Open close up of tube
Copy & Paste to layer just above ffp4. Resize & Position add in ff2. Flip tube by pressing ctrl+M. Add effects to your tube if you wish too.

Open sp10
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask84

Font used Birds of Paradise Size 14 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

CT Tags For SpazzArt and Ginnibug Designz - Using Tube "Terry" and matching Kit "Terry"

Terry

This tutorial was written by me on May 11th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called ♥Terry♥ By ©Spazzd Art
You can find ©Spazzd Art gorgeous work here.


Scrap Kit of choice, I am using a PTU  Scrapkit called ♥Terry♥ By Ginnibug Designz
You can purchase this amazing kit here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center of canvas.

Open T69
Copy & Paste to bottom layer. Resize & Position add to fit under tube. (Duplicate)with copy move to upper part of tube and rotate.

Open T19
Cope & Paste to layer just below tube. Resize and Position add to right upper part behind tube.

Open T66
Copy & Paste to top layer. Resize & Position add to right side. Flip by pressing ctrl+M place up against tube. Select your tube layer - then select Eraser Tool - Erase part of your tube that is off to the right.

Open T17
Copy & Paste to layer just above tube. Resize & Position add to right side as if T66 is sitting on it.

Open T40
Copy & Paste to top layer. Resize & Position add to right side. Flip by pressing ctrl+M add to the bottom of blanket.

Open T72
Copy & Paste to top layer. Resize & Position add to bottom as if in front of tube.

Open T71
Copy & Paste to top layer. Resize & Position add to bottom as if in front of tube. Flip by pressing ctrl+M.

Open T55
Copy & Paste to layer just below tube. Resize & Position add to bottom blend in where you wish.

Open T10
Copy & Paste to layer just below T19. Resize & Position add to top behind tube. (Duplicate) to make darker.

Open  Tp11
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called MSL_Mask302

Font used DK Early Morning Coffee Size 18 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 65 Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

CT Tags For SpazzArt and Ginnibug Designz - Using Tube "Kaley" and matching Kit "Kaley"

Kaley

This tutorial was written by me on May 7th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called ♥Kaley♥ By ©Spazzd Art

Andrea, comes with two different hair colors and 4 different colored tops.
You can find ©Spazzd Art gorgeous work here.


Scrap Kit of choice, I am using a PTU  Scrapkit called ♥Kaley♥ By Ginnibug Designz
You can purchase this amazing kit here.

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center of canvas. Flip by pressing ctrl+M.

Open K98
Copy & Paste to bottom layer. Resize & Position add to lower bottom center of tube.

Open K6
Cope & Paste to bottom layer. Resize and Position add to upper left of element K98.

Open K4
Copy & Paste to layer just below tube. Resize & Position add to bottom left up against K98.

Open K1
Copy & Paste to layer just below tube. Resize & Position add to bottom left up against K4 and rotate.

Open K24
Copy & Paste to top layer. Resize & Position add to bottom left against K1.

Open New Layer
Select Ellipse Tool - Width 15.00 - Close bottom color box - Click on top color and go to Gradient tab - adjust color you wish to use - Set repeats to 19 - Add to your creation - Duplicate - Move copy above tube - Select Erase Tool - Erase around your top copy we just made- Erase the bottom part of your tube layer.

Open K58
Copy & Paste to top layer. Resize & Position add to right bottom.

Open K61
Copy & Paste to layer just below tube. Resize & Position add to just behind K58 off to right.

Open K85
Copy & Paste to layer just below K61. Resize & Position add to right side.Select top copy of frame we made and erase where palm tree is.

Open K56
Copy & Paste to layer just above K98. Resize & Position add to center bottom.

Open K104
Copy & Paste to layer just below tube. Resize & Position add to center of canvas and adjust as you wish.

Open K33
Copy & Paste to top layer. Resize & Position add to right side paste as if on K61 and rotate.

Open  KP5
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called MSL_Mask302

Font used Cobar Size 20 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 65 Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Joker**

Joker

This tutorial was written by me  on April 22nd, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Joker* By Ginnibug Designz

You can purchase her kits from any of these stores:

PFD: http://picsfordesign.com/en/catalogue/type/k/sort/date/auth/LapisGin.pix

Hania's Design: http://haniadesign.com/store/index.php?main_page=index&manufacturers_id=39&zenid=529172ac9e0db93b7dfc0b9abd9020c8

S&Co: http://scrapsncompany.com/index.php?main_page=index&manufacturers_id=36

Tube or Image of choice, I am using a PTU Tube *Joker* By ©katharine can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center of canvas.

Open j1 frame
Copy &Paste to bottom layer. Resize & Position add to center behind tube.

Open j4
Copy & Paste to layer just below tube.  Resize & Position add to bottom right corner of j1 frame.

Open j17
Copy & Paste to layer just above j1 frame. Resize & Position add to right side and blend it in behind j4.

Open j16
Copy & Paste to layer just above j17. Resize & Position add to right side behind j4. (Duplicate)

Open j61
Copy & Paste to top layer. Resize & Position add to bottom of tube center.

Open j30
Copy & Paste to layer just above j17. Resize & Position add to bottom as if tube is on it.

Open j28
Copy & Paste to layer just below j16. Resize & Position add to right side. Flip by pressing ctrl+M.

Open j52
Copy & Paste to layer just below j28. Resize & Position add to right side between tube and tree. Flip by pressing ctrl+M.

Open j65
Copy & Paste to layer just below j28. Resize & Position add to right side and blend in. (Duplicate) mirror image by pressing ctrl+B. (Duplicate) each sides to make brighter if you wish too.

Open j68
Copy & Paste to layer just below tube. Resize & Position add to left bottom.

Open j93
Copy & Paste to layer just below j68. Resize & Position add to left bottom right behind j68. Flip by pressing ctrl+M.

Open j87
Copy & Paste to layer just below tube. Resize & Position add to right bottom right beside tube.

Open j99
Copy & Paste to layer just above  j65. Resize & Position add to center behind tube add as you wish.

Open j26
Copy & Paste to layer just above j65. Resize & Position add to top center.

Open jp14
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Martyric Personal Use Only Size 13 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz/Spazz Art Kit **Andrea** Tube **Andrea**

Andrea

This tutorial was written by Angela on April 19th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Andrea* By ©Spazzd Art

Andrea, comes with two different hair colors and 4 different colored tops.
You can find ©Spazzd Art gorgeous work here.
http://spazzdart.com/store/


Scrap Kit of choice, I am using a PTU  Scrapkit called *Andrea* By Ginnibug Designz
You can purchase this amazing kit here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center of canvas

Open a15
Copy & Paste to bottom layer. Resize & Position to the center bottom of your tube. Flip ctrl+M. (Duplicate) with copy we are going to mirror image it by pressing ctrl+B

Open a39
Cope & Paste to top layer. Resize and Position add to bottom center behind tube. (Duplicate) with copy we are going to mirror image it by pressing ctrl+B.

Open a34
Copy & Paste to top layer. Resize & Position to bottom just off to the left side.

Open a60
Copy & Paste to bottom layer. Resize & Position to the center behind tube.

Open a62
Copy & Paste to layer just above a60. Resize & Position add to left side up against a60 as I have done. (Duplicate) with copy we will mirror image it by pressing ctrl+B.

Open a84
Copy & Paste to layer just above a60.  Resize & Position add to left side blend in behind a62. (Duplicate) with copy we are going mirror image by pressing ctrl+B.

Open a112
Copy & Paste to layer just below a15. Resize & Position to right side bottom and blend in.

Open a67
Copy & Paste to top layer. Resize & Position to right side on top of a112 and blend in.

Open a64
Copy & Paste to top layer. Resize & Position to right side up some from middle.

Open a57
Copy & Paste to layer just above a60. Resize & Position to right side toward the bottom blend into back. (Duplicate) with copy we are going to mirror image it by pressing ctrl+B.

Open  ap11
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called MSL_Mask302

Font used Brush Script MT Size 20 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Summer**

Summer

This tutorial was written by me  on April 14th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Summer* By Ginnibug Designz

You can purchase her kit from here.

Hania's Designs: http://haniadesign.com/store/index.php?main_page=product_info&cPath=50_164&products_id=2541&zenid=365eecf025ad46531af3d0f2b4e8d8ce

Tube or Image of choice, I am using a FTU Tube *2013-2014 Tats HDSL (FREE)* By ©Ismail Rac can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to left side of your work.

Open s25
Copy &Paste to bottom layer. Resize & Position add to center of your canvas.

Open s11
Copy & Paste to layer just above s25. Resize & Position add to right bottom corner.

Open s16
Copy & Paste to layer just above s25. Resize & Position add to right bottom behind s11. Flip by pressing ctrl+M.

Open s17
Copy & Paste to layer just above s25. Resize & Position add to right bottom behind s11 and s16. Blend in.

Open s35
Copy & Paste to layer just above s25. Resize & Position add to right upper corner.

Open s42
Copy & Paste to layer just above s25. Resize & Position add to center bottom of s25.

Open s74
Copy & Paste to layer just above s25. Resize & Position add to center bottom of s25.

Open s22
Copy & Paste to layer just above s25. Resize & Position add to right side behind s74. Blend into the background.

Open s19
Copy & Paste to top layer. Resize & Position add to right side. Flip by pressing ctrl+M then place to look as if sitting on the handle of basket.

Open s6
Copy & Paste to layer just below tube. Resize & Position add to either side of tube bottom. (Duplicate) then flip by pressing ctrl+M and add copy to the opposite side of the tube.

Open s7
Copy & Paste to top layer. Resize & Position add to left bottom blend in with the tube and beach sign.

Open sp7
Copy& Paste to bottom layer. Resize & Position to fit inside your s25.

Open sp10
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Berlin Sans FB Size 20 and 15 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz/Spazz Art Kit **Into The Woods** Tube **Jassabelle** (COMING SOON)

 

 Into The Woods

This tutorial was written by SpiceAng on April 7th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Jassabelle* COMING SOON By ©Spazzd Art

Jassabelle, comes with three hair colors. (COMING SOON)
 

You can find ©Spazzd Art gorgeous work here.
http://spazzdart.com/store/



Scrap Kit of choice, I am using a PTU  Scrapkit called *Into The Woods* By Ginnibug Designz

You can purchase her amazing kit in these stores:
PFD: http://picsfordesign.com/en/catalogue/type/k/sort/date/auth/LapisGin.pix
Spazzd Art: http://spazzdart.com/store/index.php?main_page=index&cPath=5_27
S&Co: http://scrapsncompany.com/index.php?main_page=index&manufacturers_id=36
Hania's Design: http://haniadesign.com/store/index.php?main_page=index&manufacturers_id=39&zenid=529172ac9e0db93b7dfc0b9abd9020c8

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position off to right side of your work area.

Open itw59
Copy & Paste to bottom layer. Resize & Position to the center bottom of your work.

Open itw47
Cope & Paste to top layer. Resize and Position add to the left bottom of itw59.

Open itw31
Copy & Paste to layer just below your itw47. Resize & Position to bottom center and blend in with itw59.

Open itw17
Copy & Paste to bottom layer. Resize & Position to the center of your work so it blends in with your other elements. Flip if you would like to as I have by pressing ctrl+M.

Open itw106
Copy & Paste to layer just below tube. Resize & Position add to the bottom just off to the right side of center.

Open itw87
Copy & Paste to bottom layer.  Resize & Position add to the right side of your  then flip it by pressing ctrl+M.

Open itw112
Copy & Paste to layer just below itw106. Resize & Position to right side and blend it as I have done.

Open itw139
Copy & Paste to layer just below tube. Resize & Position to center of your work as I have done or as you wish.

Open itw163
Copy & Paste to layer just below itw59. Resize & Position to bottom center and blend in behind your other elements.

Open itw122
Copy & Paste to layer just below itw163. Resize & Position to left side bottom and blend in with the other elements.

Open itw75
Copy & Paste to layer just above itw139. Resize & Position to right side up by the moon then use your eraser tool to erase some of your bats on the left side of your tube. Then duplicate and flip copy by pressing ctrl+M.

Open itw10
Copy & Paste to layer just below tube. Resize & Position to left side not to far from center. Duplicate for it to show up brighter.

Open  itwp9
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called MSL_Mask302

Open your tube
Copy & Paste to layer just below your first mask. We are going to add just the face of the tube. In layers we are going to go to Soft Light and Opacity 80%

Font used Acryle Script Personal Use Size 22 (Bold)
*******************************
Drop shodow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

 

New CT Tutorial For Ginnibug Designz Using Kit **Dark Princess**

Dark Princess

This tutorial was written by me  on April 3rd, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Dark Princess* By Ginnibug Designz

You can purchase this kit from here.


Tube or Image of choice, I am using a PTU Tube *2015 April Desktop Calendar* By ©Arthur Crowe can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center toward bottom of canvas.

Open dp8
Copy &Paste to bottom layer. Resize & Position add to center then up some.

Open dp40
Copy & Paste to layer just below tube.  Resize & Position add to bottom right corner of dp8.

Open dp17
Copy & Paste to layer just below tube. Resize & Position add to bottom left corner of dp8.

Open dp42
Copy & Paste to layer just above bottom layer. Resize & Position add to fit behind your dp17. (Duplicate) then we are going to add our copy as a mirror to the other side by pressing ctrl+B.

Open dp9
Copy & Paste to layer just below tube. Resize & Position add to right side and place in front of dp17.

Open dp12
Copy & Paste to layer just above dp8. Resize & Position add to right side of tube. (Duplicate) then we are going to add to other side by pressing ctrl+B.

Open dp10
Copy & Paste to layer just above bottom layer. Resize & Position add to center of your bottom element dp8.

Open dp34
Copy & Paste to bottom layer. Resize & Position add to right side and blend in with your dp8. (Duplicate) then press ctrl+B to add to other side.

Open dp52
Copy & Paste to layer just behind dp42. Resize & Position add to right side and blend in with dp42.

Open dp49
Copy & Paste to top layer. Resize & Position add to front of tube and off to the left side as if she your tube is holding it with her finger.

Open dp58
Copy & Paste to layer just below tube. Resize & Position add to top center right behind your tubes head.

Open dp62
Copy& Paste to layer just above tube. Resize & Position add to center of your tube.

Open dp72
Copy & Paste to bottom layer. Resize & Position add to bottom center and adjust and add where you wish.

Open cep17
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Bleeding Cowboys Size 16 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Charming Easter**

Charming Easter

This tutorial was written by me  on March 28th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Charming Easter* By Ginnibug Designz

You can purchase her kits from any of these stores:

PFD: http://picsfordesign.com/en/catalogue/type/k/sort/date/auth/LapisGin.pix

Spazzd Art: http://spazzdart.com/store/index.php?main_page=index&cPath=5_27

S&Co: http://scrapsncompany.com/index.php?main_page=index&manufacturers_id=36

Tube or Image of choice, I am using a PTU Tube *Elis* By ©Lightartist_XXX can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center toward bottom of canvas.

Open ce14
Copy &Paste to bottom layer. Resize & Position add to center up behind your tube as I have done.

Open ce42
Copy & Paste to top layer.  Resize & Position add to top part of your fence layer.

Open ce86
Copy & Paste to layer just below tube. Resize & Position add to fit up against the bottom of fence layer.

Open ce116
Copy & Paste to layer just below tube. Resize & Position add to center just in front of eggs and blend in between tube and eggs.

Open ce2
Copy & Paste to top layer. Resize & Position add to right side and place on your tubes arm.

Open ce10
Copy & Paste to layer just above bottom fence layer. Resize & Position add to center bottom of fence and blend in behind your other eggs.

Open ce1
Copy & Paste to layer just above bottom layer. Resize & Position add to either side of fence layer and place on the grass as I have done.

Open ce106
Copy & Paste to layer just above bottom layer. Resize & Position add to right side and blend in with the grass of your bottom layer. (Duplicate) then flip your copy by pressing ctrl+M.

Open ce103
Copy & Paste to layer just above ce106. Resize & Position add to right side and blend in with ce106. (Duplicate) move your copy to the left side of your work area and put up behind your big egg.

Open ce36
Copy & Paste to layer just above bottom layer. Resize & Position add to left side of your work and place just behind your ce103 and big egg as I have done.

Open ce102
Copy & Paste to layer just below tube. Resize & Position add to right side and place in front of your flower layers.

Open ce118
Copy& Paste to layer jut above bottom layer. Resize & Position add to center and place toward the bottom of your fence and blend in behind your other elements. (Duplicate) then press ctrl+B and add to match you can arrange if you wish too.

Open ce82
Copy & Paste to bottom layer. Resize & Position add to top center so it looks like it is behind the fence.

Open cep17
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Wizard Of The Moon Size 18 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Once Upon A Time**

Once Upon A Time

This tutorial was written by me  on March 18th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Once Upon A Time* By Ginnibug Designz

You can purchase her kits from any of these stores:

ADI: http://store.artisticdreamsimaging.net/en/466-ginnibug-designz

PFD: http://picsfordesign.com/en/catalogue/type/k/sort/date/auth/LapisGin.pix

Spazzd Art: http://spazzdart.com/store/index.php?main_page=index&cPath=5_27

S&Co: http://scrapsncompany.com/index.php?main_page=index&manufacturers_id=36

Tube or Image of choice, I am using a PTU Tube *Princess&Dragon* By ©Zlata_M can be found here:
http://picsfordesign.com/en/catalogue/id_106566_princess_amp_dragon.pix

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center of canvas. We will work with tube later.

Open ouat32
Copy &Paste to bottom layer. Resize & Position to bottom of your tube and center layer to tube.

Open ouat29
Copy & Paste to top layer.  Resize & Position to right side to the bottom of grass on ouat32.

Open ouat56
Copy & Paste to top layer. Resize & Position to fit down in front of ouat29 then press ctrl+M to flip and blend.

Open ouat65
Copy & Paste to layer just below ouat29. Resize & Position to blend in between castle and sign then press ctrl+M to flip. (Duplicate) if you like.

Open ouat84
Copy & Paste to top layer.. Resize & Position to center bottom just in front of tube.

Open ouat78
Copy & Paste to layer just below ouat29. Resize & Position to right side and blend in to look as the element is on the sign.

Open ouat51
Copy & Paste to layer just above bottom layer. Resize & Position to left side and blend it in to look like it is up next to the castle as I have done.

Open ouat21
Copy & Paste to layer just above ouat51. Resize & Position to left side and blend in with the ouat51.

Open ouat41
Copy & Paste to layer just below ouat29. Resize & Position to right side and blend in with your elements as I have done.

Open ouat110
Copy & Paste to top layer. Resize & Position to right side and make it look as if sitting on top of the sign.

Open ouat61
Copy & Paste to layer just above ouat29. Resize & Position to upper part on either size of your work. (Duplicate) then press ctrl+B to add in same spot of the other side.

Open ouat60
Copy& Paste to bottom layer. Resize & Position to fit in upper center behind the castle.

Open ouat43
Copy & Paste to top layer. Resize & Position to left bottom corner of your grass.

Open ouatp(12)
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Sverige Script Demo Size 11 Bold 
Used for (Once Upon A Time) as well.
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial

New CT Tutorial For Ginnibug Designz/Spazz Art Exclusive Match Kit **Xira** Matching Tube **Xira**

*XIRA*

Xira

This tutorial was written by SpiceAng on July 25th, 2014. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag ** Scrap Kit of choice, I am using a PTU Scrapkit called *Xira* By Ginnibug Designz
  Exclusive Matching kit - Xira
to match Spazz's gorgeous Xira tube - Purple, Blue and hints of Pink.
85 Elements and 18 Papers
Tagger Size
This beautiful kit can be purchased here:
http://spazzdart.com/store/index.php?main_page=product_info&cPath=5_27&products_id=640

Tube or Image of choice, I am using a PTU Match Tube * Xira* By ©Spazz
New tube comes with different hair colors and also in green layer
This amazing tube can be purchased here:
http://spazzdart.com/store/index.php?main_page=product_info&products_id=598

Mask of choice
My mask choice is called 565 Insatiable Dreams

Text Used  Worstveld Sling Extra Oblique Size 20

Program Used: Paint Shop Pro X6
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open you tube
Copy & Paste to your canvas to the center or to your taste.

Open X 53
Copy &Paste to bottom layer. Resize & Position off to left side to look as if tube is sitting on the rock layer or to your desire.

Open X 74
Copy& Paste to top layer.Resize & Position so it looks as if it is cover some of the rock layer as I have done or do as you wish. (Duplicate) and move to your desire.

Open X 20
Copy & Paste to layer just above rock layer. Resize & Position to your desire.

Open X 34
Copy & Paste to layer 2 down from tube layer. Resize & Position to your likes.

Open X 9
Copy & Paste to top layer. Resize & Position to fit infront of treasure layer. (Duplicate) Flip Horizontal by pressing ctrl+M and move over by your rock layer and position as you wish.

Open X 4
Copy & Paste to layer below tube layer. Resize & Position just in from of treasure layer or as you wish.

Open X 35
Copy & Paste to bottom layer. Resize & Position (Duplicate) Flip Horizontal by pressing ctrl+M move over to oppisite side like a mirrow image. Then Flip Vertical by pressing ctrl+I with both of these layers.

Open X 39
Copy & Paste to layer just below tube layer. Resize & Position as you wish.

Open X 29
Copy & Paste to layer 3 below tube layer. Resize & Position as you desire.

Open X 33
Copy & Paste to layer just below your blue flower over by rock layer. Resize & Postion to fit as I have done or as you wish. (Duplicate) resize Flip Horizontal by pressing ctrl+M and position as I have  or as you wish.

Open X 7
Copy & Paste above your back layers. Resize & Position then Flip Horizontal ctrl+M and position as you wish.

Open X 27
Copy & Paste to layer just above X 7 layer. Resize & Position to your likes.

Open X 35
Copy & Paste to layer just above X 27 layer. Resize & Position as you wish.

Open X 59
Copy & Paste to layer 2 above bottom layer. Resize & Position as you wish. To lighten your work art go over to layers and adjust your Opicity to 50. Duplicate as many times as you wish. I ended up working with 4.

Open X 80
Copy & Paste to very bottom layer. Resize & Position move to top. Flip Horizontal ctrl+M if you wish as I have done.

Open XP 8
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial

New CT Tutorial For Ginnibug Designz/Spazz Art Exclusive Match Kit **Wicked** Matching Tube **Wicked**

*Wicked*

WICKED

This tutorial was written by SpiceAng on July 3rd, 2014. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********

Supplies Needed:

**New CT Tag ** Scrap Kit of choice, I am using a PTU Scrapkit called *Wicked* By Ginnibug Designz
Exclusive Matching Kit to Spazz's AWESOME Wicked tube.
Wicked comes with 112 Elements and 33 Papers
Goth, Dark, Witchy like elements
Colors of Black, Green, Red and Green
Tagger Size
Tube or Image of choice, I am using a PTU Match Tube * Wicked* By ©Spazz
Comes in 4 hair colors with/without flames
Both Kit and Tube be purchased from Spazzdart.
http://spazzdart.com

Mask of choice
My mask choice is called 565 Insatiable Dreams

Text Used  Bloodythirsty Size 16

Program Used: Paint Shop Pro X6
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open you tube
We will work with tube later

Open W3
Copy &Paste Resize & Position of a little to the right from center.

Open W4
Copy& Paste above your last layer Resize & Position move to your liking.

Open W29
Copy & Paste to bottom layer Resize & Position

Open W43
Copy & Paste to top layer Resize & Position to your likes.

Open W51
Copy & Paste to top layer Resize & Position

Open W61
Copy & Paste to layer just above very bottom layer Resize & Position to center.

Open W70
Copy & Paste layer just above last action Resize & Position

Open W69
Copy & Paste to layer just above last action Resize & Position

Open W104
Copy & Paste as very bottom layer. Resize & Position (Duplicate)

Open Wm1
Copy & Paste as very bottom layer. Resize & Postion to fit your canvas.

Open W106
Copy & Paste just above bottom layer. Resize & Position to your like.

Open W100
Copy & Paste to bottom right corner. Resize & Position to your likes.

Open W60
Copy & Paste to layer just above your tree layer. Resize & Position to your likes. I flipped mine ctrl+M.
Back to our Tube.
Copy & Paste just above house layer and Resize & Position to your likes.

Open Wp7
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
*******************************
Drop shodow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial