New CT Tutorial For Fedor Using Tube **Natasha**

Natasha

This tutorial was written by Angela on April 30th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Natasha* By ©Fedor ♥

You can find  this gorgeous tube by ©Fedor here.


Scrap Kit of choice, I am using a PTU Scrapkit called *Blue Temptation* By Chili Designz♥

You can her amazing kit in S&Co store here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center.

Open Sand
Copy & Paste to bottom layer. Resize & Position to the center beneath tube as if tube is laying on it.

Open Chair
Cope & Paste to bottom layer.  Resize and Position add to left side.

Open Cola
Copy & Paste to top layer. Resize & Position add to right side put as if in her hand.

Open Clouds
Copy & Paste to bottom layer. Resize & Position add to center top. (Duplicate x2) Add as you wish.

Open Grass
Copy & Paste to layer just below sand. Resize & Position add to right side right next to tube. (Duplicate) mirror image and move as you like. (Duplicate as much as you wish.)

Open Palm
Copy & Paste to layer just below chair. Resize & Position add to left side behind chair. Flip by pressing ctrl+M and rotate as I have done.

Open Wood
Copy & Paste to layer just below tube. Resize & Position add to center bottom and place as if tube is on it as I have done.

Open Stones
Copy & Paste to layer just below wood. Resize & Position add to left side and place under wood. ( Duplicate x3) add copies all the way down the wood.

Open Jeep
Copy & Paste to layer just above palm. Resize & Position add to center just above tube.

Open Bubbles
Copy & Paste to layer just above jeep. Resize & Position add to right side just behind tubes head. (Duplicate) and add copy up on palm tree.

Open Bag
Copy & Paste to layer just below wood. Resize & Position add next to chair. Flip by pressing ctrl+M.

Open  Papers 3
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Dainty Daisies Size 14 (Bold) and Daisy Regular Size 18 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For PinkParadox Productions Using Kit **Soft & Romantic**

Soft & Romantic

This tutorial was written by me on April 29th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called *Soft & Romantic* By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  *Juliet* By ©Verymany
you can find this gorgeous tube here.


Mask of choice
I used the mask called WSL_Mask302

Text of choice
My text is called Candlescript Demo Version Font Size 18 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to canvas. Resize and Position add to center of your canvas.

Open Soft & Romantic Frames(21)
Copy & Paste to bottom layer. Resize & Position add to right side of tube center. (Duplicate) mirror image by pressing ctrl+B.

Open Soft & Romantic (87)
Copy& Paste to top layer. Resize & Position add to center bottom part of tube. Select tube layer then select eraser tool and erase your bottm part of the tube below this element.

Open Soft & Romantic (83)
Copy & Paste to top layer. Resize & Position add to center bottom up next to (87).

Open Soft & Romantic  Frames (22)
Copy & Paste to layer just below tube. Resize & Position add to fit around frame (21). (Duplicate) mirror image by pressing ctrl+B.

Open Soft & Romantic (1)
Copy & Paste to layer just below tube. Resize & Position add to right side to top of frames. (Duplicate) resize smaller and move copy to left side bottom of frames.

Open Soft & Romantic (14)
Copy & Paste to top layer. Resize & Position add to right bottom of frames.

Open Soft & Romantic (37)
Copy & Paste to top layer. Resize & Position add to right bottom as if bear is holding the cup.

Open Soft & Romantic (102)
Copy & Paste to bottom layer. Resize & Position add to center bottom.

Open Soft & Romantic (143)
Copy & Paste to layer just below tube. Resize & Position add to left top on frames. Rotate until it fits the frame. (Duplicate x3) add to other side by pressing ctrl+B. Then flip two of the copies and add them to the bottom of the frames.

Open Soft & Romantic (68)
Copy & Paste to layer just below tube. Resize & Position add to left bottom. Flip by pressing ctrl+M.

Open Soft & Romantic (74)
Copy & Paste to top layer. Resize & Position add to left bottom on (68) as I have done.

Open Tube Close-up
Copy & Paste to bottom just before mask layers. Then add to fit in your frames. Then use your Eraser Tool and erase the extra outside the frames. Then duplicate and mirror image tube layer. Then adjust the tube as you wish..

Open Soft & Romantic Papers (7)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.

*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 55  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Fedor Using Tube **Lana**

Lana

This tutorial was written by Angela on April 28th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Lana* By ©Fedor ♥

You can find  this gorgeous tube by ©Fedor here.


Scrap Kit of choice, I am using a PTU Scrapkit called *Touch Of Vintage* By Alluring Kreationz♥

You can her amazing kit in Pics For Design store here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center.

Open AK-E-31
Copy & Paste to bottom layer. Resize & Position to the center beneath tube as if tube is sitting on it.

Open AK-E-38
Cope & Paste to layer just below tube.  Resize and Position add to right side of AK-E-31. (Duplicate) Flip by pressing ctrl+M and move to left side of AK-E-31 and blend in.

Open AK-E-53
Copy & Paste to bottom layer. Resize & Position add behind AK-E-31 and blend in behind.

Open AK-E-93
Copy & Paste to bottom layer. Resize & Position add to center of your canvas. Blend in as you wish.

Open AK-E-12
Copy & Paste to layer just below AK-E-31. Resize & Position add to left side  blend in with the flowers.

Open New Layer
Add to bottom so it is the bottom layer. Select your Picture Tube Tool then go up and select the tube for grass. Add grass as you like.

Open  AK-P-11
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called WSL_Mask302

Font used YoureInvited Size 16 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For PinkParadox Productions Using Kit **Backstage Girl**

Backstage Girl

This tutorial was written by me on April 26th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called *Backstage Girl* By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  *Dorothy* By ©Verymany
you can find this gorgeous tube here.


Mask of choice
I used the mask called WSL_Mask302

Text of choice
My text is called Dite Alla Giovine Font Size 12 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to canvas. Resize and Position add to center of your canvas.

Open Backstage Girl (110)
Copy & Paste to top layer. Resize & Position add to center bottom of tube. Select Eraser Tool make sure your tube layer is selected and erase bottom part of tube below this element.

Open Backstage Girl (112)
Copy& Paste to bottom layer. Resize & Position add to right side then rotate.

Open Backstage Girl (47)
Copy & Paste to layer just below tube. Resize & Position add to center behind your tube as I have done.

Open Backstage Girl (45)
Copy & Paste to layer just below tube. Resize & Position add to right side and add as if on element (112)

Open Backstage Girl (46)
Copy & Paste to layer just below (47). Resize & Position add to left side and rotate.

Open Backstage Girl (58)
Copy & Paste to bottom layer. Resize & Position add to center of work.

Open Backstage Girl (63)
Copy & Paste to layer just above (46). Resize & Position add to left side rotate then blend in with bottom elements as I have.

Open Backstage Girl (54)
Copy & Paste to layer just below (45). Resize & Position add to right side bottom flip by pressing ctrl+M. Blend in.

Open Backstage Girl (70)
Copy & Paste to layer just below tube. Resize & Position add to left side right next to tube blend in with coin element.

Open Backstage Girl (81)
Copy & Paste to layer just below (63). Resize & Position add to left side flip by pressing ctrl+M blend in as you wish.

Open Backstage Girl (158)
Copy & Paste to bottom layer. Resize & Position add to center of canvas.

Open Backstage Girl (168)
Copy & Paste to layer just above mask layer. Resize & Position add to top part of creation.

Open Backstage Girl Papers (19)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.

*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Fedor Using Tube **Angel**

Angel

This tutorial was written by Angela on April 24th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Angel* By ©Fedor ♥

You can find  this gorgeous tube by ©Fedor here.


Scrap Kit of choice, I am using a PTU Scrapkit called *Crazy Beautiful* By Amy Marie♥

You can her amazing kits in her store here.



Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center.

Open (96)
Copy & Paste to bottom layer. Resize & Position to the center behind your tube.

Open (26)
Cope & Paste to top layer.  Resize and Position add to bottom of work as I have done. (Duplicate) flip vertical by pressing ctrl+I then move copy to top of frame move down behind tube layer.

Open (1)
Copy & Paste to top layer. Resize & Position add to bottom then move to left from center. (Duplicate) with copy mirror image by pressing ctrl+B.

Open (17)
Copy & Paste to layer just below tube. Resize & Position add to right side place behind tube. (Duplicate) with copy mirror image by pressing ctrl+B.

Open (72)
Copy & Paste to layer just below (1). Resize & Position add to left side bottom blend in with the flowers.

Open (97)
Copy & Paste to layer just below tube.  Resize & Position add to right side bottom blend in with flowers.

Open (90)
Copy & Paste to layer just below top (26). Resize & Position add to right side center of frame. (Duplicate) with copy mirror image by pressing ctrl+B.

Open  PP(15)
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called RR_MaskSet22_1_

Font used DearJoe4 Size 14 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For PinkParadox Productions Using Kit **Alice Gone Mad**

Alice Gone Mad

This tutorial was written by me on April 23rd, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called *Alice Gone Mad* By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.


Tube or Image of choice, I am using a PTU Tube Called  *Alice* By ©Laguna
you can find this gorgeous tube here.

Mask of choice
I used the mask called RR_MaskSet_2_1

Text of choice
My text is called Alice in Wonderland Font Size 20 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to canvas. Resize and Position add to center of your canvas.

Open Alice Gone Mad Frames (8)
Copy & Paste to bottom layer. Resize & Position add to center bottom of tube.

Open Alice Gone Mad (34)
Copy& Paste to layer just below tube. Resize & Position add to left bottom corner of frame.

Open Alice Gone Mad (40)
Copy & Paste to layer just below tube. Resize & Position add right bottom corner of frame.

Open Alice Gone Mad (92)
Copy & Paste to layer just below tube. Resize & Position add to left bottom corner behind Alice Gone Mad (34).

Open Alice Gone Mad (99)
Copy & Paste to top layer. Resize & Position add to bottom center. Rotate as I have done if you desire.

Open Alice Gone Mad (118)
Copy & Paste to bottom layer. Resize & Position add as fit inside frame.

Open Alice Gone Mad (123)
Copy & Paste to layer just below tube. Resize & Position add to right bottom beside tube. (Duplicate) Mirror image by pressing ctrl+B.

Open Alice Gone Mad (54)
Copy & Paste to top layer. Resize & Position add to bottom center. Rotate to fit in front of (99).

Open Alice Gone Mad (95)
Copy & Paste to layer just above frame. Resize & Position add to right side corner of frame. Rotate (duplicate) and with copy just move it down below on frame as I have done.

Open Alice Gone Mad (93)
Copy & Paste to layer just above (95). Resize & Position add to right side corner of frame. Rotate (Duplicate) and with copy just move down below again on frame as I have done.

Open Alice Gone Mad (187)
Copy & Paste to layer just above frame. Resize & Position add to left corner. (Duplicate)

Open Alice Gone Mad Papers (25)
Copy & Paste to bottom layer. Resize & Position add behind frame adjust to fit inside frame.

Open Alice Gone Mad Papers (19)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.

*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz Using Kit **Joker**

Joker

This tutorial was written by me  on April 22nd, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Joker* By Ginnibug Designz

You can purchase her kits from any of these stores:

PFD: http://picsfordesign.com/en/catalogue/type/k/sort/date/auth/LapisGin.pix

Hania's Design: http://haniadesign.com/store/index.php?main_page=index&manufacturers_id=39&zenid=529172ac9e0db93b7dfc0b9abd9020c8

S&Co: http://scrapsncompany.com/index.php?main_page=index&manufacturers_id=36

Tube or Image of choice, I am using a PTU Tube *Joker* By ©katharine can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to center of canvas.

Open j1 frame
Copy &Paste to bottom layer. Resize & Position add to center behind tube.

Open j4
Copy & Paste to layer just below tube.  Resize & Position add to bottom right corner of j1 frame.

Open j17
Copy & Paste to layer just above j1 frame. Resize & Position add to right side and blend it in behind j4.

Open j16
Copy & Paste to layer just above j17. Resize & Position add to right side behind j4. (Duplicate)

Open j61
Copy & Paste to top layer. Resize & Position add to bottom of tube center.

Open j30
Copy & Paste to layer just above j17. Resize & Position add to bottom as if tube is on it.

Open j28
Copy & Paste to layer just below j16. Resize & Position add to right side. Flip by pressing ctrl+M.

Open j52
Copy & Paste to layer just below j28. Resize & Position add to right side between tube and tree. Flip by pressing ctrl+M.

Open j65
Copy & Paste to layer just below j28. Resize & Position add to right side and blend in. (Duplicate) mirror image by pressing ctrl+B. (Duplicate) each sides to make brighter if you wish too.

Open j68
Copy & Paste to layer just below tube. Resize & Position add to left bottom.

Open j93
Copy & Paste to layer just below j68. Resize & Position add to left bottom right behind j68. Flip by pressing ctrl+M.

Open j87
Copy & Paste to layer just below tube. Resize & Position add to right bottom right beside tube.

Open j99
Copy & Paste to layer just above  j65. Resize & Position add to center behind tube add as you wish.

Open j26
Copy & Paste to layer just above j65. Resize & Position add to top center.

Open jp14
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Martyric Personal Use Only Size 13 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Fedor Using Tube **RockGirl**

Rock Girl

This tutorial was written by Angela on April 21st, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *RockGirl* By ©Fedor ♥

You can find  this gorgeous tube by ©Fedor here.


Scrap Kit of choice, I am using a FTU  Scrapkit called *Bad Girl Kit 1 & 2* By Tiny Turtle Design ♥

You can her amazing kits in her store here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center.

Open Bad Girl Elements (175)
Copy & Paste to bottom layer. Resize & Position to the center behind your tube.

Open Bad Girl Elements (181)
Cope & Paste to layer just behind tube.  Resize and Position add to corner of frame anyone you wish to start with. Flip by pressing ctrl+M. (Duplicate) then mirror image it by pressing ctrl+B. (Duplicate) and move to bottom corner of frame and do as you did on top.

Open Bad Girl Elements (199)
Copy & Paste to layer just below tube. Resize & Position add to left top corner of frame.

Open Bad Girl Elements (200)
Copy & Paste to layer just below tube. Resize & Position add to right top corner of frame.

Open Bad Girl Elements (201)
Copy & Paste to layer just below tube. Resize & Position add just beside tube on left side.

Open Bad Girl Elements (202)
Copy & Paste to layer just below tube.  Resize & Position add to center left as I have done.

Open Bad Girl Elements (203)
Copy & Paste to layer just below tube. Resize & Position add to bottom right down by legs of tube.

Open Bad Girl Elements (219)
Copy & Paste to bottom layer. Resize & Position add to fit in frame.

Open Bad Girl Elements (220)
Copy & Paste to layer just below tube. Resize & Position add behind tube and center it to frame.(Duplicate)

Open Bad Girl Elements (264)
Copy & Paste to layer just above (219). Resize & Position add behind frame and placeto bottom. (Duplicate)

Open Bad Girl Elements (287)
Copy & Paste to layer just above (175). Resize & Position add to bottom left corner of frame then duplicate 2 more copies. Add along the bottom of frame as I have done. The middle one you can do as I have done by pressing ctrl+I.

Open  Bad Girl Papers (10)
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called WSL_Mask302

Font used AR CHRISTY  Size 14 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For PinkParadox Productions Using Kit **Beautiful Moments**

Beautiful Moments

This tutorial was written by me on April 20th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called *Beautiful Moments* By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube called  *Memories* By ©verymany
you can find this gorgeous tube here.

Mask of choice
I used the mask called WSL_Mask302

Text of choice
My text is called Dancing Script OT Font Size 18 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to canvas. Resize and Position add to right side center on canvas.

Open Beautiful Moments (105)
Copy & Paste to bottom layer. Resize & Position add to center bottom so tube looks as if she is sitting on the grass.

Open Beautiful Moments (150)
Copy& Paste to top layer. Resize & Position add to the left side center.

Open Beautiful Moments (146)
Copy & Paste to layer just below tube. Resize & Position add behind your tube. Flip by pressing ctrl+M.

Open Beautiful Moments (82)
Copy & Paste to bottom layer. Resize & Position add to center and blend in to the back.

Open Beautiful Moments (92)
Copy & Paste to layer just below tube. Resize & Position add to left of your tube. Flip by pressing ctrl+M.

Open Beautiful Moments (68)
Copy & Paste to layer just below tube. Resize & Position add as if books are sitting in the grass.

Open Beautiful Moments (60)
Copy & Paste to layer just above (146). Resize & Position add to left side add as you like or as I have done.

Open Beautiful Moments (51)
Copy & Paste to layer just below tube. Resize & Position add to right side just behind your tube and blend in.

Open Beautiful Moments (9)
Copy & Paste to top layer. Resize & Position add to center upper part of your work. Flip by pressing ctrl+M.

Open Beautiful Moments (5)
Copy & Paste to top layer. Resize & Position add to left side bottom corner. Flip by pressing ctrl+M.

Open Beautiful Moments Papers (7)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.

*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Ginnibug Designz/Spazz Art Kit **Andrea** Tube **Andrea**

Andrea

This tutorial was written by Angela on April 19th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Andrea* By ©Spazzd Art

Andrea, comes with two different hair colors and 4 different colored tops.
You can find ©Spazzd Art gorgeous work here.
http://spazzdart.com/store/


Scrap Kit of choice, I am using a PTU  Scrapkit called *Andrea* By Ginnibug Designz
You can purchase this amazing kit here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center of canvas

Open a15
Copy & Paste to bottom layer. Resize & Position to the center bottom of your tube. Flip ctrl+M. (Duplicate) with copy we are going to mirror image it by pressing ctrl+B

Open a39
Cope & Paste to top layer. Resize and Position add to bottom center behind tube. (Duplicate) with copy we are going to mirror image it by pressing ctrl+B.

Open a34
Copy & Paste to top layer. Resize & Position to bottom just off to the left side.

Open a60
Copy & Paste to bottom layer. Resize & Position to the center behind tube.

Open a62
Copy & Paste to layer just above a60. Resize & Position add to left side up against a60 as I have done. (Duplicate) with copy we will mirror image it by pressing ctrl+B.

Open a84
Copy & Paste to layer just above a60.  Resize & Position add to left side blend in behind a62. (Duplicate) with copy we are going mirror image by pressing ctrl+B.

Open a112
Copy & Paste to layer just below a15. Resize & Position to right side bottom and blend in.

Open a67
Copy & Paste to top layer. Resize & Position to right side on top of a112 and blend in.

Open a64
Copy & Paste to top layer. Resize & Position to right side up some from middle.

Open a57
Copy & Paste to layer just above a60. Resize & Position to right side toward the bottom blend into back. (Duplicate) with copy we are going to mirror image it by pressing ctrl+B.

Open  ap11
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called MSL_Mask302

Font used Brush Script MT Size 20 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Fedor Using Tube **Elizabeth**

Elizabeth

This tutorial was written by SpiceAng on April 17th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Elizabeth* By ©Fedor

You can find  this gorgeous tube by ©Fedor here.
http://picsfordesign.com/en/catalogue/id_117778_elizabeth.pix

Scrap Kit of choice, I am using a FTU  Scrapkit called *Fan Freebie 2* By Tasha's Playground

You can find this amazing kit in her blog here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center. Flip by pressing ctrl+M.

Open TP_FF2_e21
Copy & Paste to bottom layer. Resize & Position to the right side middle.

Open TP_FF2_e02
Cope & Paste to top layer.  Resize and Position to center bottom of tubes legs. (Duplicate)

Open TP_FF2_e04
Copy & Paste to top layer. Resize & Position to the left bottom corner of last action we just added.

Open TP_FF2_e22
Copy & Paste to layer just below top layer (Flowers). Resize & Position add to blend in down to the bottom of your work. Flip By pressing ctrl+M. ( Duplicate)

Open TP_FF2_e11
Copy & Paste to bottom layer. Resize & Position add to center in the middle of your canvas.

Open TP_FF2_e14
Copy & Paste to layer just above e11.  Resize & Position add to the left side and blend in with bottom layer. Rotate if you wish as I have done. (Duplicate) then mirror image copy by pressing ctrl+B. You may want to rotate your copy.

Open TP_FF2_e01
Copy & Paste to layer just below e04. Resize & Position to left bottom behind purple flowers.

Open TP_FF2_e12
Copy & Paste to top layer. Resize & Position to the right side and add to e21. (Duplicate) add where you wish and as many as you want.

Open TP_FF2_e19
Copy & Paste to top layer. Resize & Position to right side and add where you wish.

Open TP_FF2_e06
Copy & Paste to top layer. Resize & Position to right side and add in front of of stool. Flip by pressing ctrl+M.

Open TP_FF2_e17
Copy & Paste to layer just below e04. Resize & Position to left side and blend in with your other flower layers. Flip by pressing ctrl+M if you wish to do so.

Open  TP_FF2_paper01
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called RR_MaskSet_2_1

Font used Playball  Size 20 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For PinkParadox Productions Using Kit **Undercover Ninja**

Undercover Ninja

This tutorial was written by me on April 16th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called *Undercover Ninja* By Pink Paradox Productions. 

You can find this kit and many other beautiful kits here.


Tube or Image of choice, I am using a PTU Tube Called  *Fan* By ©verymany
you can find this gorgeous tube here.


Mask of choice
I used the mask called WSL_Mask302

Text of choice
My text is called CF Jack Story Font Size 14 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to canvas. Resize and Position add to center of your work.

Open Undercover Ninja (84)
Copy & Paste to bottom layer. Resize & Position add to the center of your canvas.

Open Undercover Ninja (76)
Copy& Paste to layer just below tube. Resize & Position add to the right side up next to (84). Flip by pressing ctrl+M.

Open Undercover Ninja (83)
Copy & Paste to layer just above bottom. Resize & Position to the center lower part behind your tube.

Open Undercover Ninja (72)
Copy & Paste to layer just above (83). Resize & Position add to top of bench layer as if it was sitting on the bench. Place it off to the right side on bench.

Open Undercover Ninja (73)
Copy & Paste to layer just above (83). Resize & Position to the left side and place on top of bench as if it is sitting on it.

Open Undercover Ninja (94)
Copy & Paste to layer just above (84). Resize & Position add to center and fit to your bottom layer.

Open Undercover Ninja (97)
Copy & Paste to layer just above (94). Resize & Position add to right side. Blend in behind your bench flip by pressing ctrl+M.

Open Undercover Ninja (88)
Copy & Paste to layer just above (94). Resize & Position add to right side middle. (Duplicate) with copy we are going to mirror image it by pressing ctrl+B.

Open Undercover Ninja (47)
Copy & Paste to layer just above your tube. Resize & Position add to center bottom down by your tubes legs.

Open Undercover Ninja (45)
Copy & Paste to layer just above (47). Resize & Position add to the top of plate off to the left side.

Open Undercover Ninja (49)
Copy & Paste to layer just below (45). Resize & Position add to top of plate off to right side.

Open Undercover Ninja (50)
Copy & Paste to top layer. Resize & Position add to plate in front of bowl of rice.

Open Undercover Ninja (46)
Copy & Paste to top layer. Resize & Position add to the center of plate. Flip by pressing ctrl+M and rotate if you wish as I have done.

Open Undercover (148)
Copy & Paste to layer just above (94). Resize & Position add to top center of your work as I have done.

Open Undercover Ninja (1)
Copy & Paste to layer just below tube. Resize & Position to the left side next to bench. Flip by pressing ctrl+M.

Open Undercover Ninja (153)
Copy & Paste to layer just below (148). Resize & Position to the left side behind bench and tiger. (Duplicate) then we are going to mirror image by pressing ctrl+B.

Open Bumble Bee Royalty (108)
Copy & Paste to layer just below (76). Resize & Position to the center bottom of your work. (Duplicate) then flip your copy by pressing ctrl+M.

Open Undercover Ninja Papers (52)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.

*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial for Spazzd Art/MellieBeans Tube used *Grad Pup* By Spazz Kit used *Graduation 2015* By MellieBeans

Graduation 2015

This tutorial was written by me  on April 15th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Graduation 2015* By Mellie Beans

You can purchase her kits from these stores just click on the links.

http://www.mysticalscraps.com/index.php?main_page=product_info&cPath=7_221&products_id=12122

http://www.heartbeatzcreationz.com/index.php?main_page=product_info&cPath=1_244&products_id=14701

http://spazzdart.com/store/index.php?main_page=product_info&cPath=5_58&products_id=1103

 

Tube or Image of choice, I am using a PTU Tube *Grad Pup* By ©Spazzd Art can be found here.



Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to center of your canvas.

Open Books
Copy &Paste to bottom layer. Resize & Position a little to the left from the center of your work behind your tube.

Open Diploma
Copy & Paste to layer just below tube.  Resize & Position add to left bottom corner of books. Rotate the diploma if you like as I have done.

Open Grad Cake
Copy & Paste to layer just below tube. Resize & Position add to right side up against books.

Open Laptop
Copy & Paste to layer just below diploma. Resize & Position add to center and place as if tube is sitting on the laptop.

Open Music
Copy & Paste to layer just below tube. Resize & Position add to center to upper top of books.

Open Camera
Copy & Paste to top layer. Resize & Position to left side lower part on books and corner of diploma.

Open Cap and Gown 1
Copy & Paste to layer just above books. Resize & Position add to the top of your books. Select the Eraser Tool and Erase the cap from the layer. Blend the gown in with the books as I have done.

Open Star Tag
Copy & Paste to top layer. Resize & Position add right side upper corner of books. Rotate if you wish as I have done.

Open Bow 3
Copy & Paste to top layer. Resize & Position add to top of your star tag.

Open Stars
Copy & Paste to layer just below music. Resize & Position add to lower right side (duplicate) mirror image by pressing ctrl+B.

Open Balloon 2
Copy & Paste to layer just blow tube. Resize & Position add to the center top of tubes head.

Open Balloon 4
Copy & Paste to layer just below balloon 2. Resize & Position add to right side of other balloon.


Open cap paper 1
Copy & Paste to bottom layer
Resize to fit your whole canvas. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used AHDN Size 22 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Fedor Using Tube **Valentina**

Valentina

This tutorial was written by SpiceAng on April 15th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Valentina* By ©Fedor

You can find  this gorgeous tube by ©Fedor here.


Scrap Kit of choice, I am using a FTU  Scrapkit called *Porcelain Doll* By Gimptastic Scraps

You can find this amazing kit in her blog here.



Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center.

Open Frame2
Copy & Paste to bottom layer. Resize & Position to the center bottom of your tube.

Open Beads
Cope & Paste to top layer.. Resize and Position to center bottom of tube.

Open Hearts
Copy & Paste to top layer. Resize & Position to the left bottom corner.

Open LightScatter
Copy & Paste to layer just above frame2. Resize & Position to the left bottom behind tube. (Duplicate) select copy and then mirror image by pressing ctrl+B.

Open Ruffle
Copy & Paste to layer just above tube. Resize & Position add to center bottom. Flip by pressing ctrl+M.

Open Shoe
Copy & Paste to top layer.  Resize & Position add to the right bottom corner will need to rotate some.

Open You+Me
Copy & Paste to layer just below beads. Resize & Position to right bottom. Fit in behind your other elements.

Open SweetTag
Copy & Paste to top layer. Resize & Position to the center bottom center it with tube.

Open Sparkles2
Copy & Paste to layer just below tube. Resize & Position to upper part of your work. Then duplicate as many times as you like. Just place them and resize where you wish.

Open  Paper 8
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called MSL_Mask302

Font used AHDN  Size 16 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

She comes with other color layers and options.

New CT Tutorial For Ginnibug Designz Using Kit **Summer**

Summer

This tutorial was written by me  on April 14th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Summer* By Ginnibug Designz

You can purchase her kit from here.

Hania's Designs: http://haniadesign.com/store/index.php?main_page=product_info&cPath=50_164&products_id=2541&zenid=365eecf025ad46531af3d0f2b4e8d8ce

Tube or Image of choice, I am using a FTU Tube *2013-2014 Tats HDSL (FREE)* By ©Ismail Rac can be found here.


Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste  Resize & Position to left side of your work.

Open s25
Copy &Paste to bottom layer. Resize & Position add to center of your canvas.

Open s11
Copy & Paste to layer just above s25. Resize & Position add to right bottom corner.

Open s16
Copy & Paste to layer just above s25. Resize & Position add to right bottom behind s11. Flip by pressing ctrl+M.

Open s17
Copy & Paste to layer just above s25. Resize & Position add to right bottom behind s11 and s16. Blend in.

Open s35
Copy & Paste to layer just above s25. Resize & Position add to right upper corner.

Open s42
Copy & Paste to layer just above s25. Resize & Position add to center bottom of s25.

Open s74
Copy & Paste to layer just above s25. Resize & Position add to center bottom of s25.

Open s22
Copy & Paste to layer just above s25. Resize & Position add to right side behind s74. Blend into the background.

Open s19
Copy & Paste to top layer. Resize & Position add to right side. Flip by pressing ctrl+M then place to look as if sitting on the handle of basket.

Open s6
Copy & Paste to layer just below tube. Resize & Position add to either side of tube bottom. (Duplicate) then flip by pressing ctrl+M and add copy to the opposite side of the tube.

Open s7
Copy & Paste to top layer. Resize & Position add to left bottom blend in with the tube and beach sign.

Open sp7
Copy& Paste to bottom layer. Resize & Position to fit inside your s25.

Open sp10
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_Mask302

Font used Berlin Sans FB Size 20 and 15 Bold 
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For PinkParadox Productions Using Kit **Bumble Bee Royalty**

Bumble Bee Royalty

This tutorial was written by me on April 13th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called *Bumble Bee Royalty* By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.

Tube or Image of choice, I am using a PTU Tube Called  *Just Bee* By ©Zlata_M
you can find this gorgeous tube here.

Mask of choice
I used the mask called WSL_Mask302

Text of choice
My text is called AR DESTINE Font Size 16 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to canvas. Resize and Position add to center of your work.

Open Bumble Bee Royalty Frames (4)
Copy & Paste to bottom layer. Resize & Position add to the center of your tube.

Open Bumble Bee Royalty (36)
Copy& Paste to layer just below tube. Resize & Position add to the left bottom corner.

Open Bumble Bee Royalty (33)
Copy & Paste to top layer. Resize & Position to the center of tube.

Open Bumble Bee Royalty (37)
Copy & Paste to top layer. Resize & Position add to the left bottom corner. Flip by pressing ctrl+M.

Open Bumble Bee Royalty (2)
Copy & Paste to layer just above frame. Resize & Position to left bottom. Flip by pressing ctrl+M.

Open Bumble Bee Royalty (13)
Copy & Paste to top layer. Resize & Position add to left bottom place so the bee look as if it is on the spoon of honey.

Open Bumble Bee Royalty (15)
Copy & Paste to top layer. Resize & Position add to the left bottom place on the honey barrel.

Open Bumble Bee Royalty (35)
Copy & Paste to layer just above frame. Resize & Position add to right top corner of frame.

Open Bumble Bee Royalty (38)
Copy & Paste to layer just below your tube. Resize & Position add to right bottom corner.

Open Bumble Bee Royalty (39)
Copy & Paste to layer just above frame. Resize & Position add to the right bottom behind (38).

Open Bumble Bee Royalty (55)
Copy & Paste to layer just above frame. Resize & Position add to right bottom behind (39). Blend in as you like.

Open Bumble Bee Royalty (80)
Copy & Paste to layer just above frame. Resize & Position add to the center bottom center. Use your eraser tool to erase the grass below frame.

Open Bumble Bee Royalty (125)
Copy & Paste to layer just above grass. Resize & Position add to the right bottom. Flip by pressing ctrl+M.

Open Bumble Bee Royalty (123)
Copy & Paste to layer above your grass. Resize & Position add to the right bottom blend it in between your tube and the other elements.

Open Bumble Bee Royalty (150)
Copy & Paste to bottom layer. Resize & Position to the cneter top.

Open Bumble Bee Royalty (7)
Copy & Paste to top layer. Resize & Position to the left top corner of frame.

Open Bumble Bee Royalty (16)
Copy & Paste to top layer. Resize & Position to the right bottom corner.

Open Bumble Bee Royalty (6)
Copy & Paste to top layer. Resize & Position to the right top corner.

Open Bumble Bee Royalty (135)
Copy & Paste to layer just above bear. Resize & Position to right bottom. ( Duplicate) with copy mirror image by pressing ctrl+B.

Open Bumble Bee Royalty (169)
Copy & Paste to layer just above tree. Resize & Position to center just above frame.

Open Bumble Bee Royalty Papers (43)
Copy & Paste to layer just below your first frame.
Resize & Position to fit in the frame.

Open Bumble Bee Royalty (20)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.

*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Fedor Using Tube **Springtime**

Springtime

This tutorial was written by SpiceAng on April 10th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Tube of Choice, I am using a PTU Tube called *Springtime* By ©Fedor

You can find  this gorgeous tube by ©Fedor here.

 

Scrap Kit of choice, I am using a PTU  Scrapkit called *Summer Evening* By Tiny Turtle Design

You can purchase her amazing kits in her store here.

 

Mask of choice

Program Used: Paint Shop Pro X7 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste to your canvas. Resize & Position to the center.

Open Summer Evening Frame (38)
Copy & Paste to bottom layer. Resize & Position to the center bottom of your tube.

Open Summer Evening (36)
Cope & Paste to layer just above frame.. Resize and Position to the left side bottom corner of frame and rotate as I have done.

Open Summer Evening (32)
Copy & Paste to layer just above frame. Resize & Position to the left side just behind your last element (36).

Open Summer Evening (24)
Copy & Paste to layer just below tube. Resize & Position to the left side down in the corner of your frame and blend in with your other elements.

Open Summer Evening (7)
Copy & Paste to layer just above frame. Resize & Position add to the left side upper part of your frame. (Duplicate) then we need to mirror image the copy by pressing ctrl+B.

Open Summer Evening (39)
Copy & Paste to layer just below tube.  Resize & Position add to the right side down in the corner of the frame. Then you can flip as I have done by pressing ctrl+M.

Open Summer Evening (43)
Copy & Paste to layer just below element (39). Resize & Position to right side just behind your cup element and put off to either side. (Duplicate) then flip by pressing ctrl+M and move if you wish to your liking.

Open Summer Evening (47)
Copy & Paste to layer just below element (43). Resize & Position to the right side behind your other element and adjust to your liking.

Open Summer Evening (64)
Copy & Paste to layer just above frame. Resize & Position to left side top corner of your frame. (Duplicate) then we are going to add the copy to the other side by pressing ctrl+B.

Open Summer Evening (107)
Copy & Paste to top layer. Resize & Position to center of your tube. Then select your eraser tool and then erase the bottom part of your tube as I have done.

Open Summer Evening Paper (19)
Copy & Paste to bottom layer. Resize & Position to fit inside your frame layer.

Open  Summer Evening Paper (16)
Copy & Paste on bottom layer
Resize to fit canvas

Then add mask of choice
Mask I used is called MSL_Mask302

Font used Allura Size 20 and for Spring Time I used Size 18 (Bold)
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For Scrap und Grafik Design Using Kit **Spring Garden**

Spring Garden

This tutorial was written by me  on April 9th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

Scrap Kit of choice, I am using a PTU  Scrapkit called *Spring Garden* By Scrap und Grafik Design

You can purchase her kits from any of these stores:
Scrap und Grafik:
http://dagnys-scrap.cwsurf.de/Shop1/categories.php?CategoryID=1003

Insprirations of Sprapfriends:
http://inspirationsofscrapsfriends.com/shop/index.php?main_page=index&manufacturers_id=169

Tube or Image of choice, I am using a PTU Tube *Friends* By ©Laguna can be found here.


Mask of choice

Program Used: Paint Shop Pro X6 but any PSP should work.
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube of choice
Copy & Paste.  Resize & Position to center of canvas.

Open Frame 03
Copy &Paste to bottom layer. Resize & Position add to the bottom and place in the middle behind your tube.

Open Spring Garden6
Copy & Paste to layer just above frame. Resize & Position add to the center bottom just under tube.

Open Spring Garden67
Copy & Paste to layer just below tube. Resize & Position add to the right bottom of your frame .

Open Spring Garden31
Copy & Paste to layer just above Spring Garden67. Resize & Position add to the top of Spring Garden67 and resize to blend in as I have done.

Open Spring Garden65
Copy & Paste to layer just below tube. Resize & Position add to bottom center and add so it is behind you tube as I have done.

Open Spring Garden02
Copy & Paste to layer just above frame. Resize & Position add to the top right corner of your frame. Duplicate then we are going to mirror image it by pressing ctrl+B.

Open Spring Garden44
Copy & Paste to layer just below your tube. Resize & Position add to top of your barrel element and flip by pressing ctrl+M.

Open Spring Garden57
Copy & Paste to layer just below tube. Resize & Position add to left side behind your money friend and blend in as I have done.

Open Spring Garden48
Copy & Paste to top layer. Resize & Position to left side and add as you wish. Duplicate and add as you wish.

Open Spring Garden51
Copy & Paste to layer just below barrel layer. Resize & Position add to right side right behind your barrel and add to blend in with green leaves.

Open Spring Garden46
Copy& Paste to layer just below tube. Resize & Position to bottom and place so it fits behind tube layer and up against the water fountain.

Open Spring Garden68
Copy& Paste to top layer. Resize & Position add to right side up next to bridge layer.

Open Spring Garden05
Copy& Paste to bottom layer. Resize & Position add to center of your frame.

Open Spring Garden Papers 06
Copy & Paste on bottom layer
Resize to fit frame layer. (Duplicate)

Then add mask of choice
Mask I used is called WSL_ Mask302

Font used Allura Size 16 Bold
*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 14.00

To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.

New CT Tutorial For PinkParadox Productions Using Kit **Summer Dream**

Summer Dream

This tutorial was written by me on April 8th, 2015. Any resemblance to any other tutorials is purely coincidental! You may not copy/paste any part of my tuts elsewhere, but you may text link to them for challenges etc!
*********
Supplies Needed:

**New CT Tag** Scrap Kit of choice, I am using a PTU Scrapkit called *Summer Dream* By Pink Paradox Productions.

You can find this kit and many other beautiful kits here.


Tube or Image of choice, I am using a PTU Tube Called  *Ophelia* By ©verymany
you can find this gorgeous tube here. 

Mask of choice
I used the mask called WSL_Mask302

Text of choice
My text is called AR CENA Font Size 20 Bold

Program Used: Paint Shop Pro X7
****************
Let's Begin

650X650 New Image Canvas-Transparent BKgrnd

Open your tube
Copy & Paste to canvas. Resize and Position add to the left side of your work.

Open Summer Dream Frames (5)
Copy & Paste to bottom layer. Resize & Position add to the center of your canvas.

Open Summer Dream Frames (3)
Copy& Paste to layer just below tube. Resize & Position add to the center of your bottom frame.

Open Summer Dream (15)
Copy & Paste to top layer. Resize & Position to the bottom left side and add up next to your tube.

Open Summer Dream (16)
Copy & Paste to layer just below tube. Resize & Position add to the right side of your tube and toward the bottom of your frames as I have done.

Open Summer Dream (19)
Copy & Paste to layer just below Summer Dream (16) . Resize & Position add to the right side and flip by pressing ctrl+M and adjust so that the handle is behind your bag.

Open Summer Dream (18)
Copy & Paste to layer just below your tube. Resize & Position add to right side of your tube and add as if part of the hat she is in front of. Add up against the bag element as I have done or where you would like.

Open Summer Dream (25)
Copy & Paste to top layer. Resize & Position add to the right side down in the corner of your bottom frame.

Open Summer Dream (26)
Copy & Paste to layer just above tube. Resize & Position add to left side place it as if the glass is in your tubes hand. Then if you wish you can use the erase tool and erase what is over the finger as I did with mine.

Open Summer Dream (29)
Copy & Paste to layer just below your coca nut layer. Resize & Position add to right side and place behind the coca nuts.

Open Summer Dream (49)
Copy & Paste to layer just above your top frame. Resize & Position add to the right side of your work and place up behind your bag layer. Flip if you wish as I have done with mine by pressing ctrl+M.

Open Summer Dream (89)
Copy & Paste to layer just above your bottom frame. Resize & Position add to the bottom center so that it fits under all your elements.

Open Summer Dreams (94)
Copy & Paste to bottom layer. Resize & Position add to the center of your top frame and resize to your liking.

Open Summer Dream (155)
Copy & Paste to layer just above bottom layer. Resize & Position add to the left side to top corner of your bottom frame. Use the eraser tool to erase some of the element if you wish to do as I have done. Duplicate and we are going to mirrow image it by pressing ctrl+B.

Open Summer Dream (160)
Copy & Paste to layer below your towels. Resize & Position add to the right side top corner of both frames.

Open Summer Dream (158)
Copy & Paste to layer just above Summer Dream (160). Resize & Position to the right side up in front of your other plant element and blend it in to fit.

Open Summer Dream (137)
Copy & Paste to layer just below umbrella. Resize & Position to the right side up in front of your other plant element and blend it in to fit.

Open Summer Dream (162)
Copy & Paste to top layer. Resize & Position to the right side up in front of your other plant element and blend it in to fit.

Open Summer Dream (136)
Copy & Paste to layer just above your top frame. Resize & Position to the left side up top corner of your frames and right behind tube. Adjust element and then duplicate a couple more and add down the side as I have done.

Open Summer Dream Papers (35)
Copy & Paste to layer just below your first frame.
Resize & Position to fit in the frame.

Open Summer Dream Papers (37)
Copy & Paste to bottom
Resize & Position to fit your canvas.

Add mask of your choice.

*******************************
Drop shadow used in all layers was
Vertical: 2  Horizontal: 2  Opacity: 45  Blur: 13.00
To finish add any other details and your copyright.
Make sure to save your work then you are finished.
*******************************
Hope this was easy and fun to follow!
Thanks for trying my tutorial.